© Semiconductor Components Industries, LLC, 2015
April, 2015 − Rev. 2
1 Publication Order Number:
KAF−8300/D
KAF-8300
3326 (H) x 2504 (V) Full
Frame CCD Image Sensor
Description
The KAF−8300 Image Sensor is a 22.5 mm diagonal (Four Thirds
Format) high performance color or monochrome full frame CCD
(charge-coupled device) image sensor designed for a wide range of
image sensing applications including digital imaging. Each pixel
contains blooming protection by means of a lateral overflow drain
thereby preventing image corruption during high light level
conditions. For the color version, the 5.4 mm square pixels are
patterned with an RGB mosaic color filter with overlying microlenses
for improved color response and reproduction. Several versions of
monochrome devices are available with or without microlenses.
Table 1. GENERAL SPECIFICATIONS
Parameter Typical Value
Architecture Full Frame CCD; with Square Pixels
Total Number of Pixels 3448 (H) × 2574 (V) = approx. 8.9 Mp
Number of Effective Pixels
Color Device
Monochrome Device
3358 (H) × 2536 (V) = approx. 8.6 Mp
3366 (H) × 2544 (V) = approx. 8.6 Mp
Number of Active Pixels 3326 (H) × 2504 (V) = approx. 8.3 Mp
Pixel Size
5.4 mm (H) × 5.4 mm (V)
Active Image Size 17.96 mm (H) × 13.52 mm (V)
22.5 mm (Diag.), 4/3 Optical Format
Aspect Ratio 4:3
Horizontal Outputs 1
Saturation Signal > 25.5 ke
Output Sensitivity
23 mV/e
Quantum Efficiency (Color)
R (450 nm)
G (550 nm)
B (650 mm)
33%
40%
33%
Quantum Efficiency
(Monochrome)
Microlens, Clear Glass (540 nm)
Microlens, No Glass (540 nm)
Microlens, AR Glass (540 nm)
No Microlens, Clear G. (560 nm)
54%
60%
56%
37%
Total Sensor Noise 16 e
Dark Signal < 200 e
/s
Dark Current Doubling Temp. 5.8°C
Linear Dynamic Range 64.4 dB
Linear Error at 12°C ±10%
Charge Transfer Efficiency 0.999995
Blooming Protection
(1 ms Integration Time)
1000X Saturation Exposure
Maximum Date Rate 28 MHz
Package 32-pin CERDIP, 0.070 Pin Spacing
Cover Glass Clear or AR Coated, 2 Sides
NOTE: Parameters above are specified at T = 60°C and a data rate of 28 MHz
unless otherwise noted
www.onsemi.com
Figure 1. KAF−8300 Full Frame CCD
Image Sensor
Features
TRUESENSE Transparent Gate Electrode
for High Sensitivity
High Resolution
High Dynamic Range
Low Noise Architecture
Applications
Digitization
Medical
Scientific
See detailed ordering and shipping information on page 2 o
f
this data sheet.
ORDERING INFORMATION
KAF−8300
www.onsemi.com
2
The sensor utilizes the TRUESENSE Transparent Gate Electrode to
improve sensitivity compared to the use of a standard front side
illuminated polysilicon electrode.
ORDERING INFORMATION
Table 2. ORDERING INFORMATION − KAF−8300 IMAGE SENSOR
Part Number Description Marking Code
KAF−8300−AAB−CB−AA Monochrome, No Microlens, CERDIP Package (Sidebrazed),
Clear Cover Glass (No Coatings), Standard Grade
KAF−8300XE
Serial Number
KAF−8300−AAB−CB−AE Monochrome, No Microlens, CERDIP Package (Sidebrazed),
Clear Cover Glass (No Coatings), Engineering Grade
KAF−8300−AXC−CB−AA Monochrome, Microlens, CERDIP Package (Sidebrazed),
Clear Cover Glass (No Coatings), Standard Grade
KAF−8300−AXC
Serial Number
KAF−8300−AXC−CB−AE Monochrome, Microlens, CERDIP Package (Sidebrazed),
Clear Cover Glass (No Coatings), Engineering Grade
KAF−8300−AXC−CP−AA Monochrome, Microlens, CERDIP Package (Sidebrazed),
Taped Clear Cover Glass (No Coatings), Standard Grade
KAF−8300−AXC−CP−AE Monochrome, Microlens, CERDIP Package (Sidebrazed),
Taped Clear Cover Glass (No Coatings), Engineering Grade
KAF−8300−AXC−CD−AA Monochrome, Microlens, CERDIP Package (Sidebrazed),
Clear Cover Glass with AR Coatings (Both Sides), Standard Grade
KAF−8300−AXC−CD−AE Monochrome, Microlens, CERDIP Package (Sidebrazed),
Clear Cover Glass with AR Coatings (Both Sides), Engineering Grade
KAF−8300−CXB−CB−AA−Offset Color (Bayer RGB), Special Microlens, CERDIP Package (Sidebrazed),
Clear Cover Glass (No Coatings), Standard Grade, Offset
KAF−8300CE
Serial Number
KAF−8300−CXB−CB−AE−Offset Color (Bayer RGB), Special Microlens, CERDIP Package (Sidebrazed),
Clear Cover Glass (No Coatings), Engineering Grade, Offset
Table 3. ORDERING INFORMATION − EVALUATION SUPPORT
Part Number Description
KAF−8300−12−28−A−EVK Evaluation Board (Complete Kit)
See the ON Semiconductor Device Nomenclature document (TND310/D) for a full description of the naming convention
used for image sensors. For reference documentation, including information on evaluation kits, please visit our web site at
www.onsemi.com
.
KAF−8300
www.onsemi.com
3
DEVICE DESCRIPTION
Architecture
Figure 2. Block Diagram (Color)
BB
R
R
GR GR
GRGR
GB
248 pixels
Last Hccd Phase: H1
3326 Active Pixels (typical active line format)
Last Vccd Phase: V2
16 Active Buffer
4 Blue Pixel Buffer
8 Dark Dummy
39 Dark
6 Dark Dummy
3 Dummy
1 Active (CTE Monitor)
H1
H2
16 Active Buffer
4 Blue Pixel Buffer
5 Dark Dummy
5 Dummy
1 Active (CTE Monitor)
8 Dummy
4 Virtual Dummy Column
2 Dummy
OG
SUB
VOUT
RG
RD
H1L
VDD
VSS
V1
V2
1 Active (CTE Monitor)
16 Active Buffer
4 Blue Pixel Buffer
3 Dark Dummy
LODT
LODB
16 Active Buffer
4 Blue Pixel Buffer
8 Dark Dummy
12 Dark
6 Dark Dummy
2504 Active Lines/Frame
Active Image Area 3326 (H) X 2504 (V)
Effective Image Area 3358 (H) X 2536 (V)
5.4 microns X 5.4 microns
4:3 Aspect Ratio
1163 pixels 1162 pixels

KAF-8300-CXB-CB-AA-OFFSET

Mfr. #:
Manufacturer:
ON Semiconductor
Description:
Image Sensors FULL FRAME CCD IMAGE SENSOR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union