Module Dimensions
Figure 3: 200-Pin DDR2 SODIMM
3.8 (0.15)
MAX
Pin 1
67.75 (2.667)
67.45 (2.656)
20.0 (0.787)
TYP
1.8 (0.071)
(2X)
0.6 (0.024)
TYP
0.45 (0.018)
TYP
2.0 (0.079) R
(2X)
Pin 199
Pin 200
Pin 2
Front view
2.0 (0.079)
TYP
6.0 (0.236) TYP
63.6 (2.504)
TYP
1.0 (0.039)
TYP
31.15 (1.187)
29.85 (1.175)
Back view
1.1 (0.043)
0.9 (0.035)
U1
U2 U3 U4
U5 U6
U7
U8 U9
47.4 (1.87)
TYP
11.4 (0.45)
TYP
4.2 (0.165)
TYP
4.0 (0.157) TYP
15.35 (0.6)
TYP
Notes:
1. All dimensions are in millimeters (inches); MAX/MIN or typical (TYP) where noted.
2. The dimensional diagram is for reference only. Refer to the JEDEC MO document for
additional design dimensions.
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-3900
www.micron.com/productsupport Customer Comment Line: 800-932-4992
Micron and the Micron logo are trademarks of Micron Technology, Inc.
All other trademarks are the property of their respective owners.
This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein.
Although considered final, these specifications are subject to change, as further product development and data characterization some-
times occur.
256MB, 512MB, 1GB (x64, DR) 200-Pin DDR2 SODIMM
Module Dimensions
PDF: 09005aef80ebed66
htf8c32_64_128x64hd.pdf - Rev. E 3/10 EN
19
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2006 Micron Technology, Inc. All rights reserved.
