MAX7033
315MHz/433MHz ASK Superheterodyne
Receiver with AGC Lock
_______________________________________________________________________________________ 5
Note 1: 100% tested at T
A
= +25°C. Guaranteed by design and characterization over temperature.
Note 2: IRSEL is internally set to 375MHz IR mode. It can be left open when the 375MHz image-rejection setting is desired. Bypass
to AGND with a 1nF capacitor in a noisy environment.
Note 3: BER = 2 x 10
-3
, Manchester encoded, data rate = 4kbps, IF bandwidth = 280kHz.
Note 4: Input impedance is measured at the LNAIN pin. Note that the impedance includes the 15nH inductive degeneration con-
nected from the LNA source to ground. The equivalent input circuit is 50Ω in series with 2.2pF.
Note 5: Crystal oscillator frequency for other RF carrier frequency within the 300MHz to 450MHz range is (f
RF
- 10.7MHz)/64 for
XTALSEL = 0V, and (f
RF
- 10.7MHz)/32 for XTALSEL = V
DD5
.
AC ELECTRICAL CHARACTERISTICS (continued)
(
Typical Application Circuit
, V
AVDD
= V
DVDD
= V
DD5
= +3.0V to +3.6V, all RF inputs are referenced to 50Ω, f
RF
= 315MHz,
T
A
= -40°C to +105°C, unless otherwise noted. Typical values are at V
AVDD
= V
DVDD
= V
DD5
= +3.3V and T
A
= +25°C.) (Note 1)
Typical Operating Characteristics
(
Typical Application Circuit
, V
AVDD
= V
DVDD
= V
DD5
= +3.3V, f
RF
= 315MHz, T
A
= +25°C, unless otherwise noted.)
vs. AVERAGE CARRIER POWER
