9DB306 Data Sheet
©2016 Integrated Device Technology, Inc Revision C February 18, 201616
REVISION HISTORY SHEET
Rev Table Page Description of Change Date
A T3F 2 Added PLL Mode Function Table. 4/7/05
B
T4A
T9
3
6
8
15
Power Supply Table - minimum V
CCA
changed from 3.135V to V
CC
- 0.60V,
and maximum set to V
CC
.
Corrected 3.3V Output Load AC Test Circuit diagram to correspond with Power
Supply table.
Added Recommendations for Unused Input and Output Pins.
Ordering Information Table - added lead-free SSOP part number.
6/16/06
B 1 Features Section - added Input Frequency Range and VCO Range bullets. 7/14/06
C
T5
4
11
Changed power supply from 3.3V±5% to 3.3V±10% throughout the datasheet.
AC Characteristics Table - changed Output Skew from 55ps typ./135ps max. to
25ps typ./100ps max.
Changed Cycle-toCycle Jitter from 25ps max. to 30ps max.
Changed Output Duty Cycle from 48% min./52% max. to 47% min./53% max.
Power Considerations - correct Power Dissipation to coincide with the power supply
change.
9/22/06
C
T4C
T5A - T5B
T9
3
4
7
8
9
15
Differential DC Characteristics Table - updated notes.
AC Characteristics Tables - added thermal note.
Power Supply Filtering Techniques - deleted last line “ The 10ohm resistor can also
be replaced by a ferrite bead.”
Updated Differential Clock Input Interface section.
Updated Figures 4A and 4B.
Ordering Information Table - deleted ICS prefi x in Part/Order Number column.
Added 28 Lead SSOP Lead-free marking.
8/13/09
C
14 Package Information - Table 8A and 8B corrected D and N dimensions.
3/14/12
C
T9 15 Ordering Information - removed leaded devices.
Updated data sheet format.
7/24/15
C
T9 15 Ordering Information - removed quantities in tape and reel. Deleted LF note below
table.
Updated header and footer.
2/18/16
