OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

FIDO5100BBCZ

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19
Real-Time Ethernet
Multiprotocol (REM) Switch
Data Sheet
fido5100/fido5200
Rev. 0 Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2017 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
144-lead CSP_BGA RoHS compliant package
−40°C to +85°C industrial temperature range rating
3.3 V input/output buffers
IEEE 802.3, 10 Mbps/100 Mbps, half and full duplex, IPv6 and
IPv4 communication
2 independent Ethernet ports: 1 MII and 1 RMII interface per
port
Support for all industrial protocols
PROFINET Class B and Class C with fast startup (Version 2.3)
EtherNet/IP with QuickConnect, CIP Sync, and CIP Motion
Modbus TCP
EtherCAT
SERCOS III
Ethernet POWERLINK
Host interface transfer rate: 32 bits per 28 ns
Supports EtherCAT cycle times down to 12.5 μs and
PROFINET cycle times down to 31.25 μs
PI Net Load Class III capable
DLR (supervisor and node, announce and beacon based),
MRPD, HSR, PRP, shared device, controller redundancy
IEEE 1588 Version 2 support: ordinary clock; both peer to peer
and end to end transparent clocks, raw frames, and UDP
8 independent timer signals synchronized with an internal
precision timer
4 independently programmable timer signals for timer
capture events or timer output events
4 timer signals create programmable periodic waveforms
synchronized to the internal precision timer
DCP, LLDP, DHCP, RSTP, VLAN, IGMP snooping support
Forwarding table with aging and learning
Drive LEDs for link activity
APPLICATIONS
Industrial automation
Process control
Managed Ethernet switch
FUNCTIONAL BLOCK DIAGRAM
TIMER
CONTROL
UNIT
INTERRUPT
CONTROL
HOST
INTERFACE
BUFFER
MEMORY
fido5100/fido5200
PORT 1
PORT 2
15833-001
Figure 1.
GENERAL DESCRIPTION
The fido5100 and fido5200 are programmable IEEE 802.3
10 Mbps/100 Mbps Ethernet Internet Protocol Version 6 (IPv6)
and Internet Protocol Version 4 (IPv4) switches that support
virtually any Layer 2 or Layer 3 protocol. The switches are
personalized to support the desired protocol by firmware that is
downloaded from a host processor.
The firmware is contained in the real-time Ethernet multiproto-
col (REM) switch driver, and is downloaded at power-up. The
REM switch can be ready for network data operation in less
than 4 ms to support fast startup and quick connect type network
functionality. The fido5100/fido5200 devices have the same
signal assignments as defined in this data sheet.
The fido5100 supports the following protocols: PROFINET real
time (RT) and isochronous real time (IRT), EtherNet/IP with
and without device level ring (DLR), Modbus TCP, SERCOS III,
and POWERLINK.
The fido5200 supports the following protocols: EtherCAT and
all protocols defined for the fido5100.
The REM switch is intended for use with a host processor.
Network operation is handled using the functions and services
provided in the REM switch driver. The host processor can
implement any protocol stack by integrating it with the REM
switch driver. An example application is shown in Figure 11.
The fido5100 and fido5200 REM switches are available in a
144-ball chip scale package ball grid array (CSP_BGA) package.
Note that throughout this data sheet, multifunction pins, such
as A02/ALE, are referred to either by the entire pin name or by
a single function of the pin, for example, ALE, when only that
function is relevant.
fido5100/fido5200 Data Sheet
Rev. 0 | Page 2 of 19
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Specifications ..................................................................................... 3
REM Switch Characteristics ........................................................ 3
Timing Specifications—NonMultiplexed Address Data Bus . 3
Timing Specifications—Multiplexed Address Data Bus ......... 5
Absolute Maximum Ratings ............................................................ 7
ESD Caution .................................................................................. 7
Pin Configuration and Function Descriptions ............................. 8
Theory of Operation ...................................................................... 12
Device Interfaces ........................................................................ 12
Internal Precision Timer ........................................................... 12
Host Interface .............................................................................. 12
Ethernet Interface ....................................................................... 15
Applications Information .............................................................. 17
REM Switch Hardware .............................................................. 17
Board Layout ............................................................................... 17
Design Considerations .............................................................. 17
Outline Dimensions ....................................................................... 19
Ordering Guide .......................................................................... 19
REVISION HISTORY
10/2017—Revision 0: Initial Version
Data Sheet fido5100/fido5200
Rev. 0 | Page 3 of 19
SPECIFICATIONS
REM SWITCH CHARACTERISTICS
Table 1.
Parameter Min Typ Max Unit Test Conditions/Comments
OPERATING CONDITIONS
Core Voltage 1.08 1.2 1.32 V
Input/Output (I/O) Buffers 2.97 3.3 3.63 V 3.3 V power supply
PLL Analog Voltage Regulator Power Supply 1.08 1.2 1.32 V
DC Input Voltage −0.5 +3.8 V
Output Voltage −0.5 +3.8 V
Operating Junction Temperature (Industrial) −40 +125 °C
DC CHARACTERISTICS (I/O STANDARD)
3.3 V LVCMOS
VCC+3V3 2.97 3.3 3.63 V Voltage level applied to the VCC+3V3 signal
Input Voltage
Low (V
IL
) −0.3 +0.8 V
High (V
IH
)
2.0
V
Output Voltage
Low (V
OL
) 0.4 V
High (V
OH
) 2.4 V
Output Current
Low (I
OL
) 8.2 13.0 16.1 mA
High (I
OH
) 9.2 19.2 30.7 mA
LEAKAGE CURRENT
Input Pin
−10
μA
Input voltage (V
IN
) = 0 V to 3.3 V maximum
Tristated I/O Pin −10 +10 μA Output voltage (V
OUT
) = 0 V to 3.3 V maximum
HOST INTERFACE TRANSFER RATE
1
32 Bits Per 28 ns
1
Supports EtherCAT cycle times down to 12.5 μs and PROFINET cycle times down to 31.25 μs.
TIMING SPECIFICATIONS—NONMULTIPLEXED ADDRESS DATA BUS
Table 2. Nonmultiplexed Address Data Bus—Read and Write Cycle Timing
1
Parameter Min Typ Max Unit Description
t
AS
20 ps Address setup time
t
AH
1 ns Address hold time
t
CDV
20 ns
CS to data valid time
t
ODV
20 ns Output enable to data valid time
t
OEL
20 ns Output enable low time
t
CSH
8 ns
CS high time
t
CSL
20
ns
CS low time
t
EOE
0 ns
CS to output enable time
t
COE
0 ns
Output enable high to
CS high
t
DO
150 ps Output enable to data drive time
t
DHZ
110 ps Output disable to high-Z time
t
CHZ
110 ps
CS high to high-Z time
t
WES
0
ns
CS to write enable
t
WEWC
16 ns Write enable to write complete
t
WECS
0 ns
Write enable high to
CS high
t
DS
30 ps
Data setup to
WE high
t
DH
30 ps
Input data hold after
WE high
1
The MBS pin determines whether the host interfaced has multiplexed or separate address and data lines. When MBS = 0, the interface is nonmultiplexed.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P19

FIDO5100BBCZ

Mfr. #:
Buy FIDO5100BBCZ
Manufacturer:
Analog Devices Inc.
Description:
Ethernet ICs REM Switch
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet