OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

2866750

P1-P3P4-P6P7-P9P10-P12P13-P15
1Description
Primary-switched power supply with SFB
technology, 1 AC, output current 5 A
QUINT-PS/ 1AC/24DC/ 5
© PHOENIX CONTACT - 09/2009
Data sheet
INTERFACE
QUINT POWER power supply units – Maximum system
availability with SFB technology
Compact power supply units of the new QUINT POWER
generation maximize the availability of your system. With the
SFB technology (Selective Fuse Breaking Technology), six
times the nominal current for 12 ms, even the standard power
circuit-breakers can now also be triggered reliably and
quickly. Faulty current paths are switched off selectively, the
fault is located and important system parts continue to
operate. Comprehensive diagnostics are provided through
constant monitoring of output voltage and current. This
preventive function monitoring visualizes critical operating
modes and reports them to the control unit before an error can
occur.
DANGER OF EXPLOSION!
Only remove equipment when it is disconnected and not in the potentially explosive area.
DANGER
Components with dangerously high voltage and high stored energy are located in the device!
Never carry out work on live parts!
Depending on the ambient temperature and the load, the housing can become very hot!
Make sure you always use the latest documentation.
It can be downloaded at www.phoenixcontact.net/download
– Quick tripping of the standard power circuit-breakers
using dynamic power reserve SFB technology
– Reliable starting of difficult loads with static POWER
BOOST power reserve
– Preventive function monitoring
– Can be used worldwide
– High degree of operational safety due to high MTBF >
500 000 h, long mains buffering times > 20 ms, high
dielectric strength up to 300 V AC
103127_en_04
Features
QUINT-PS/ 1AC/24DC/ 5
103127_en_04 PHOENIX CONTACT 2
2Table of contents
1 Description ..................................................................................................................................1
Features.....................................................................................................................................................................1
2 Table of contents.........................................................................................................................2
3 Ordering data ..............................................................................................................................3
4 Technical data.............................................................................................................................3
5 Structure......................................................................................................................................7
6 Block diagram .............................................................................................................................8
7 Safety and warning notes ............................................................................................................8
8 Installation ...................................................................................................................................9
9 Installation position......................................................................................................................9
10 Mounting on DIN rails ................................................................................................................ 10
Slim-style installation ...............................................................................................................................................10
Low-profile installation .............................................................................................................................................10
11 Connection to various systems..................................................................................................11
12 Input .......................................................................................................................................... 11
Protection of the primary side...................................................................................................................................11
Recommended backup fuse for mains protection....................................................................................................11
13 Output ....................................................................................................................................... 12
Protection of the secondary side ..............................................................................................................................12
14 Signaling ................................................................................................................................... 12
Floating contact........................................................................................................................................................13
Active signal outputs ................................................................................................................................................13
Signal loop ...............................................................................................................................................................13
15 Function .................................................................................................................................... 14
Output characteristic curve ......................................................................................................................................14
Thermal behavior .....................................................................................................................................................14
Parallel operation .....................................................................................................................................................15
Redundant operation ...............................................................................................................................................15
Increased performance............................................................................................................................................15
QUINT-PS/ 1AC/24DC/ 5
103127_en_04 PHOENIX CONTACT 3
Description Type Order No. Pcs. / Pkt.
Primary-switched power supply with SFB technology, 1 AC, output current
5 A
QUINT-PS/ 1AC/24DC/ 5 2866750 1
Accessories Type Order No. Pcs. / Pkt.
Universal wall adapter UWA 182/52 2938235 1
Assembly adapter for QUINT-PS... power supply on S7-300 rail QUINT-PS-ADAPTERS7/1 2938196 1
Fan for QUINT-PS ... power supply. The fan eliminates the position-
dependent derating of the power supply.
QUINT-PS/FAN/4 2320076 1
Input data
Input nominal voltage range 100 V AC ... 240 V AC
AC input voltage range 85 V AC ... 264 V AC
Short-term input voltage 300 V AC
DC input voltage range 90 V DC ... 350 V DC
AC frequency range 45 Hz ... 65 Hz
DC frequency range 0 Hz
Current consumption Approx. 1.2 A (120 V AC)
Approx. 0.6 A (230 V AC)
Inrush current limitation < 15 A (typical)
I
2
t < 1 A
2
s
Power failure bypass > 30 ms (120 V AC)
> 30 ms (230 V AC)
Typical response time < 0.5 s
Protective circuitry Transient surge protection Varistor
Input fuse, integrated 5 A (slow-blow, internal)
Recommended backup fuse for mains protection 6 A (characteristic B)
10 A (characteristic B)
16 A (characteristic B)
Discharge current to PE < 3.5 mA
Output data
Nominal output voltage 24 V DC ±1%
Setting range of the output voltage 18 V DC ... 29.5 V DC (> 24 V constant capacity)
Output current 5 A (-25°C ... 70°C, U
OUT
= 24 V DC)
7.5 A (with POWER BOOST, -25°C ... 40°C permanently, U
OUT
= 24 V DC)
30 A (with SFB technology, 12 ms)
Magnetic fuse tripping max 2 A (Characteristic C)
Derating From +60°C 2.5% per Kelvin
Control deviation < 1 % (change in load, static 10% ... 90%)
< 2 % (change in load, dynamic 10% ... 90%)
< 0.1 % (change in input voltage ±10%)
Power loss nominal load max. 15 W
Maximum power dissipation idling 3 W
Efficiency > 90 % (for 230 V AC and nominal values)
Ascent time < 0.5 ms
Residual ripple < 40 mV
PP
(with nominal values)
Connection in parallel Yes, for redundancy and increased capacity
3Ordering data
4 Technical data
P1-P3P4-P6P7-P9P10-P12P13-P15

2866750

Mfr. #:
Buy 2866750
Manufacturer:
Phoenix Contact
Description:
DIN Rail Power Supplies QUINT SFB 1PHASE 24VOLT 5AMP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet