QUINT-PS/ 1AC/24DC/ 5
103127_en_04 PHOENIX CONTACT 12
13 Output
LN
PE
Input AC 100-240V
Output DC 24V 5 A
13
14
-
-
-
+++
D
C
O
K
Ι
<
Ι
N
DC OK
Boost
18-29,5V
QUINT POWER
The connection is established using screw connections on
the screw connection of the DC output:
24 V DC: "+" and "–"; DC OK switching output active: "DC OK"
and "–"; DC OK output floating: "13" and "14"; POWER
BOOST switching output active: "I < I
N
" and "–".
At the time of delivery, the output voltage is 24 V DC. The
output voltage can be set on the potentiometer.
Protection of the secondary side
The device is electronically protected against short circuit and
idling. In the event of a malfunction, the output voltage is
limited to 35 V DC.
CAUTION
Make sure that all output lines are dimensioned
according to the maximum output current or are
separately protected. The cables on the
secondary side must have sufficiently large
cross sections in order to keep the voltage
drops on the lines as low as possible.
14 Signaling
An active signal output DC OK, a floating signal contact DC OK and an active signal output POWER BOOST are available
for function monitoring. In addition, the DC OK LED and the BOOST LED can be used to evaluate the function of the power
supply directly at the installation location (see output characteristic curve).
I < I
N
I > I
N
U
OUT
< 0.9 x U
N
"DC OK" LED ON ON Flashing
"BOOST" LED OFF ON ON
Active DC OK switching
output
ON ON OFF
Floating DC OK output Closed Closed Open
Active POWER BOOST
switching output
ON OFF OFF
Meaning Normal operation of the
power supply
(U
OUT
>21.5V)
POWER BOOST operation,
e.g. to start loads
Overload mode, e.g.
consumer short circuit or
overload