QUINT-PS/ 1AC/24DC/ 5
103127_en_04 PHOENIX CONTACT 4
Connection in series Yes
Surge protection against internal surge voltages Yes, limited to approx. 35 V DC
Resistance to reverse feed max. 35 V DC
DC OK active
Output description U
OUT
> 0.9 x U
N
: High signal
Voltage + 18 V DC ... 24 V DC
Current 20 mA (short circuit resistant)
Status display U
OUT
> 0.9 x U
N
: "DC OK" LED green / U
OUT
< 0.9 x U
N
: Flashing "DC OK" LED
DC OK floating
Output description Relay contact, U
OUT
> 0.9 x U
N
: Contact closed
Voltage 30 V AC/DC
Current 1 A
Status display U
OUT
> 0.9 x U
N
: "DC OK" LED green / U
OUT
< 0.9 x U
N
: Flashing "DC OK" LED
POWER BOOST, active
Output description I
OUT
< I
N
: High signal
Voltage + 18 V DC ... 24 V DC
Current 20 mA (short circuit resistant)
Status display I
OUT
> I
N
: LED "BOOST" yellow /
General data
Insulation voltage input/output 4 kV AC (type test)
2 kV AC (routine test)
Insulation voltage input / PE 3.5 kV AC (type test)
2 kV AC (routine test)
Insulation voltage output / PE 500 V DC (routine test)
Degree of protection IP20
Class of protection I, with PE connection
MTBF > 500 000 h in acc. with IEC 61709 (SN 29500)
Type of housing Steel sheet, zinc-plated
Housing material Steel sheet, zinc-plated
Dimensions W / H / D (state of delivery) 40 mm / 130 mm / 125 mm
Dimensions W / H / D (90° turned) 122 mm / 130 mm / 43 mm
Weight 0.7 kg
Ambient conditions
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C derating)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) 95 % (at 25 °C, no condensation)
Vibration (operation) < 15 Hz, amplitude ±2.5 mm in acc. with IEC 60068-2-6
15 Hz ... 150 Hz, 2.3g, 90 min.
Shock 30g in all directions in acc. with IEC 60068-2-27
Pollution degree in acc. with EN 50178 2
Climatic class 3K3 (in acc. with EN 60721)
Output data (Continued)
QUINT-PS/ 1AC/24DC/ 5
103127_en_04 PHOENIX CONTACT 5
Standards
Electrical Equipment for Machinery EN 60204
Safety transformers for power supply units IEC 61558-2-17
Electrical safety (of information technology equipment) IEC 60950/VDE 0805 (SELV)
Electronic equipment for use in electrical power installations EN 50178/VDE 0160 (PELV)
SELV IEC 60950 (SELV) and EN 60204 (PELV)
Safe isolation DIN VDE 0100-410
DIN VDE 0106-1010
Protection against electric shock DIN 57100-410
Protection against electric shock, basic requirements for safe isolation in
electrical equipment
DIN VDE 0106-101
Limitation of mains harmonic currents EN 61000-3-2
Device safety GS (tested safety)
Network variants (undervoltage) Semi F47-0706
Certificate CB Scheme
Approvals
UL approvals UL Listed UL 508
UL/C-UL Recognized UL 60950
UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D
Conformance with EMC guideline 2004/108/EC and for low-voltage guideline 2006/95/EC
Noise immunity according to EN 61000-6-2
Electrostatic discharge EN 61000-4-2
Housing Level 4
Contact discharge 8 kV
Discharge in air 15 kV
Comments Criterion B
Electromagnetic HF field EN 61000-4-3
Housing Level 4
Frequency range 80 MHz ... 1000 MHz (20 V/m)
1 GHz ... 3 GHz (10 V/m)
Field intensity
Comments Criterion A
Fast transients (burst) EN 61000-4-4
Input 4 kV (level 4 - asymmetrical)
Output 2 kV (level 1 - asymmetrical)
Signal 1 kV (level 1 - asymmetrical)
Comments Criterion B
Surge current loads (surge) EN 61000-4-5
Input 4 kV (inst. class 4 - asymmetrical: conductor to ground)
2 kV (inst. class 4 -symmetrical: conductor to conductor)
Output 2 kV (level 3 - asymmetrical: conductor to ground)
1 kV (level 1 - symmetrical: conductor to conductor)
Signal 1 kV (level 3 - asymmetrical: conductor to ground)
Comments Criterion B
QUINT-PS/ 1AC/24DC/ 5
103127_en_04 PHOENIX CONTACT 6
Conducted interference EN 61000-4-6
Input/Output/Signal Level 3 - asymmetrical
Frequency range 0.15 MHz ... 80 MHz
Voltage 10 V
Comments Criterion A
Voltage dips EN 61000-4-11
Input (Mains buffering > 20 ms (Semi F47))
Comments Criterion B
Emitted interference in acc. with EN 61000-6-3
Radio interference voltage in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
Conformance with EMC guideline 2004/108/EC and for low-voltage guideline 2006/95/EC (Continued)
Noise immunity according to EN 61000-6-2

2866750

Mfr. #:
Manufacturer:
Phoenix Contact
Description:
DIN Rail Power Supplies QUINT SFB 1PHASE 24VOLT 5AMP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet