MAX2306/MAX2308/MAX2309
CDMA IF VGAs and I/Q Demodulators
with VCO and Synthesizer
4 _______________________________________________________________________________________
AC ELECTRICAL CHARACTERISTICS (continued)
(MAX2306/MAX2308/MAX2309 EV kit, V
CC
= +2.75V, registers set to default power-up states except M1 = M2 = 306, R1 = R2 = 16,
f
IN
= 183.7MHz, f
REF
= 19.2MHz, 0.6Vp-p synthesizer locked with passive 3rd-order lead-lag loop filter, SHDN = high, VGC set for
+35dB voltage gain, differential output load = 10kΩ, all power levels referred to 50Ω, T
A
= +25°C, unless otherwise noted.)
Note 1: FM_IQ and FM_I modes are not available on MAX2309.
Note 2: Recommended operating frequency range. Contact factory for operating frequency outside this range.
Note 3: f
1
= 183.7MHz, f
2
= 183.71MHz, P
f1
= P
f2
= -15dBm.
Note 4: f
1
= 183.7MHz, f
2
= 183.71MHz, P
f1
= P
f2
= -50dBm.
Note 5: Guaranteed by design.
Note 6: Small-signal gain at 200kHz below the LO frequency will be reduced by less than 0.25dB when an interfering signal at
1.25MHz below the LO frequency is applied at the specified level.
Note 7: f
1
= 183.7MHz, f
2
= 183.71MHz, P
f1
= P
f2
= -23dBm.
Note 8: f
1
= 183.7MHz, f
2
= 183.71MHz, P
f1
= P
f2
= -55dBm.