VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
Revision: 29-May-18
10
Document Number: 45226
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1 - GENERAL CERTIFICATES
2 - TECHNICAL REQUIREMENTS
Unless specified in component specification, these parameters are the minimum requirements for the components.
2.1 OPERATING TEMPERATURE RANGE
2.2 CHARACTERISTICS
2.3 STORAGE AND HANDLING CONDITIONS
# Quality management system according to ISO/TS 16949: 2009 Yes
# Quality management system according to ISO 9001: 2008 Yes
# Environmental certification according to ISO 14001: 2004 Yes
# Health and safety system according to OHSA 18001 Yes
For standard applications T
A
: -55 °C to +125 °C See characteristics 2.2
For high temperature applications T
A
: -55 °C to +150 °C See characteristics 2.2
For ultra high temperature applications T
A
: -55 °C to +175 °C See characteristics 2.2
PARAMETER
CERAMIC
TYPE
SYMBOL RATINGS
TEST CONDITIONS /
REMARKS
Rated voltage in temperature range -55 °C to +125 °C
C0G (NP0)
U
R
25 V to 3000 V
X7R 16 V to 1000 V
Rated voltage in temperature range -55 °C to +150 °C X8R 25 V / 50 V
Derating at higher temperature up to +150 °C
C0G (NP0) 25 V to 100 V U
DC
1
/
2
U
R
X7R 16 V to 100 V U
DC
1
/
2
U
R
Derating at higher temperature up to +175 °C
C0G (NP0) 25 V to 100 V U
DC
1
/
4
U
R
X7R 16 V to 100 V U
DC
1
/
4
U
R
X8R 25 V / 50 V U
DC
1
/
4
U
R
Temperature coefficient in temperature range
-55 °C to +125 °C
C0G (NP0)
C
± 30 ppm/°C if C
R
< 10 pF:
C
± 120 ppm/°C
X7R C ± 15 %
Temperature coefficient in temperature range
-55 °C to +150 °C
C0G (NP0)
C
± 30 ppm/°C if C
R
< 10 pF:
C
± 120 ppm/°C
X7R
C
+ 15 % / - 30 %
X8R ± 15 %
Temperature coefficient in temperature range
-55 °C to +175 °C
X7R C 15 % / - 50 %
Dissipation factor in temperature range
-55 °C to +175 °C
C0G (NP0)
tan
0.0015
X7R 0.06
X8R 0.06
(1) Store the components at 5 °C to 40 °C ambient temperature and 70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
