VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
Revision: 29-May-18
15
Document Number: 45226
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
3 - LOT ACCEPTANCE TESTS
Process tests available in classes (on request)
Upon request the records can be submitted in electronic format on monthly basis.
3.1 THERMAL STRENGTH, THERMAL SHOCK SENSIBILITY
Acceptance criteria: zero defects (IRATS and BIATS).
3.2 BOARD FLEX TEST
3.3 SOLDERABILITY / RESISTANCE TO SOLDERING HEAT
Temperature profile for reflow soldering of SMD parts IPC/JEDEC-J-STD-020C.
Test is done on a regular basis for samples taken randomly out of the line.
Acceptance criteria: at least 95 % new solder and no detachment or leaching of terminations.
4 - ENVIRONMENTAL REQUIREMENTS
A list of the chemical substances content, which must not be used or whose use shall be limited by international law, is available
on request.
Vishay confirms that the components specified in this specification do not contain asbestos nor cadmium, not even in the
smallest volumes.
The manufacturer / supplier confirms that the component during normal handling, storage and assembly, as well as during
operation in the automobile, is non toxic.
GROUP ACTION
A
Components are tested within the monitoring program of the supplier. The supplier shall submit the part numbers of the
selected component to the customer during the component specification discussions.
B Components (customer P/N) shall be tested quarterly. Records available only on special request by the customer.
C
Test with each shipment. Records are provided on a monthly basis.
Customer special requirement; requirement should be determined in a specific component specification.
Sample size 200
Handling Mounted on PCB
Thermal shock 1 x 280 °C, no pre-heat, 5 s to 10 s
IR - test (IRATS) U = U
R
, T = room temperature, verified
Burn in (BIATS)
Equivalent to 12 h burn-in,
2 x U
R
/125 °C,
verification time to failure
Sample size 20 pcs/lot
Frequency At least three different part numbers of one component family matrix per quarter
Max. deflection 8 mm (data to be reported, available on request)
