6.42
IDT70V9279/69S/L
High-Speed 32/16K x 16 Dual-Port Synchronous Static RAM Industrial and Commercial Temperature Ranges
19
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
CORPORATE HEADQUARTERS for SALES: for Tech Support:
6024 Silver Creek Valley Road 800-345-7015 or 408-284-8200 408-284-2794
San Jose, CA 95138 fax: 408-284-2775 DualPortHelp@idt.com
www.idt.com
Datasheet Document History
01/12/99: Initiated datasheet document history
Converted to new format
Cosmetic and typographical corrections
Added additional notes to pin configurations
Page 14 Added Depth & Width Expansion section
06/15/99: Page 4 Deleted note 6 for Table II
09/29/99: Page 7 Corrected typo in heading
11/10/99: Replaced IDT logo
03/31/00: Combined Pipelined 70V9279/69 family and Flow-through 70V927 family offerings into one data sheet
Changed ±200mV in waveform notes to 0mV
Added corresponding part chart with ordering information
01/017/01: Page 4 Changed information in Truth Table II
Increased storage temperature parameters
Clarified TA parameter
Page 5 DC Electrical parameters–changed wording from "open" to "disabled"
Removed Preliminary status
02/25/04: Consolidated multiple devices into one datasheet
Changed naming conventions from VCC to VDD and from GND to Vss
Page 2 Added date revision for pin configuration
Page 3 Added footnotes for UB, LB, CE0 and CE1 buffer conditions when FT or PIPE
Page 4 Added junction temperature to Absolute Maximum Ratings Table
Added Ambient Temperature footnote
Page 5 Added I-temp numbers for 9ns speed to DC Electrical Characteristics Table
Added 6ns speed DC power numbers to the DC Electrical Characteristics Table
Page 7 Added I-temp for 9ns speed to AC Electrical CharacteristicsTable
Added 6ns speed AC timing numbers to the AC Electrical Characteristics Table
Page 18 Added 6ns speed grade and 9ns I-temp to ordering information
Added IDT Clock Solution Table
Page 1 & 19 Updated IDT logo, replaced IDTTM logo with IDT® logo
05/04/04: Page 1 & 18 Added 7ns speed grade to ordering information
Page 5 Added 7ns speed DC power numbers to the DC Electrical Characteristics Table
Page 8 Added 7ns speed AC timing numbers to the AC Electrical Characteristics Table
10/11/04: Page 4 Updated Capacitance table
Page 5 Added 7ns I-temp and removed 9ns I-temp DC power numbers from the DC Electrical Characteristics table
Page 8 Added 7ns I-temp and removed 9ns I-temp from the AC Electrical Characteristics table
Page 12 Added Timing Waveform of Left Port Write to Pipelined Right Port Read
Page 18 Added 7ns I-temp and removed 9ns I-temp from ordering information
01/19/06: Page 1 Added green availability to features
Page 18 Added green indicator to ordering information
10/23/08: Page18 Removed "IDT" from orderable part number
