ADRF5132 Data Sheet
Rev. A | Page 10 of 12
APPLICATION CIRCUIT
Generate the evaluation printed circuit board (PCB) used in the
application circuit shown in Figure 17 with proper RF circuit
design techniques. Signal lines at the RF port must have a 50 Ω
impedance, and the package ground leads and backside ground
slug must connect directly to the ground plane. The evaluation
board shown in Figure 16 is available from Analog Devices,
Inc., upon request.
16424-017
Figure 16. ADRF5132-EVALZ Evaluation Board Component Placement
Table 7. Bill of Materials for ADRF5132-EVALZ Evaluation Board
Reference Designator Description
J1 to J3 PCB mount SMA connector
C1 to C5 100 pF, 250 V capacitor, 0402 package
C6 1000 pF capacitor, 0402 package
C7 1 μF capacitor, 0402 package
C8, C9, C12 Do not insert
R1 0 Ω resistor, 0402 package
U1 ADRF5132 SPDT switch
PCB
1
ADRF5132-EVALZ
2
evaluation PCB
1
Circuit board material: Roger 4350 or Arlon 25FR.
2
Reference this evaluation board number when ordering the complete evaluation board.