QUINT-PS/24DC/24DC/10/CO
105538_en_01 PHOENIX CONTACT 16
15.3 Active switching output “U
IN
>19.2V”
During normal operation of the DC/DC converter, the
U
IN
>19.2V output signal is between connection terminal
blocks "U
IN
>19.2V” and “-” and can carry a maximum of
20mA. The U
IN
>19.2V signal output indicates a low input
voltage by switching from “active high” to “low”.
15.4 Floating relay contact “DC OK” 13/14
The floating relay contact is located between connection ter-
minal blocks 13 and 14 and can be loaded with
max.100mA at max.30VAC/DC. The relay contact signal-
izes a drop of output voltage of more than 10% by opening
the N/O contact.
The relay contact is decoupled from the power output. This
makes it impossible for devices connected in parallel to act
as an external power supply.
15.5 Derating
15.6 Temperature-dependent derating
With an ambient temperature of up to +40°C, the device
supplies the continuous output current of I
BOOST
. The de-
vice can supply a nominal output current of I
N
with ambient
temperatures of up to +60°C. In the case of ambient temper-
atures above +60°C, the output current must be reduced by
2.5% per Kelvin increase in temperature. The device does
not switch off at ambient temperatures of +70°C or thermal
overload. The output capacity is reduced as far as neces-
sary to provide device protection. After it has cooled down,
the output capacity is increased again.
15.7 Voltage-dependent derating
The nominal input voltage of 24VDC is divided into the
areas of starting and operation. The DC/DC converter re-
quires at least 18VDC for cold starting, whereby the input
voltage can sink to 14VDC during operation. The device
only switches off under this limit. The upper voltage limit is
32VDC for both starting and operation.
18 ... 24 V DC
20 mA
U >19,2V
IN
PLC Digital Input
+
max. 30 V AC/DC
100 mA
13 14
PLC Digital Input
+
+
-25
0
40 6020
I
BOOST
I
N
Ambient temperature [°C]
Output
curren
t [A]
100%
125%
14
15 16 17 18
[U /V]
IN
[I /A]
OUT
= 12 VU
OUT
U = 13 V
OUT
U = 14 V
OUT
-25 ℃ ... 40℃
40 ℃ ... 60 ℃
QUINT-PS/24DC/24DC/10/CO
105538_en_01 PHOENIX CONTACT 17
15.8 Position-dependent derating
The DC/DC converters can be snapped onto all DIN rails ac-
cording to EN 50022-35. They should be mounted horizon-
tally (input terminal blocks on bottom). When installing in a
different mounting position, derating should be observed.
The characteristic curve can be used to determine the max-
imal output power to be drawn for each ambient temperature
for different mounting positions.
Normal mounting position
Rotated mounting position 90° X-axis
1
3
1
4
_
_
_
OK
DC
I
<
I
N
19.2V
U
IN
>
Output D
C 24V 10A
Boost
DC OK
18-29.5V
U <19.2 V
IN
Input D
C 24V
QUINT POWER
13
14
19.2V
>
I
N
U
!
Z
X
Y
I
N
I
BOOST
-25
0 10 20 30 4050607080
[°C]
[A]
U
IN
>
19.2V
13
14
QUINT P
OWER
Boost
DC OK
18-29.5V
U >19.2V
IN
Input D
C 24V
Output D
C 24V 10A
!
Z
X
Y
I
N
I
BOOST
-25
0 10 20 30 4050607080
[°C]
[A]
QUINT-PS/24DC/24DC/10/CO
105538_en_01 PHOENIX CONTACT 18
Rotated mounting position 180° X-axis
Rotated mounting position 270° X-axis
U
I
N
>
1
9
.2
V
13
14
QUINT POWER
O
u
tp
ut D
C
24V
10A
Boost
DC OK
18-29.5V
U <19.2 V
IN
In
pu
t D
C
24
V
!
Z
X
Y
I
N
I
BOOST
-25
0 10 20 30 4050607080
[°C]
[A]
U
IN
>
19.2V
13
14
QUINT POWER
Output D
C 24V 10A
Boost
DC OK
18-29.5V
U <19.2 V
IN
Input D
C 24V
!
Z
X
Y
I
N
I
BOOST
-25
0 10 20 30 4050607080
[°C]
[A]

2320555

Mfr. #:
Manufacturer:
Phoenix Contact
Description:
DIN Rail Power Supplies QUINT-PS/24DC 24DC/10/CO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet