1100 2.5-Inch and M.2 SATA NAND Flash
SSD
MTFDDAK256TBN, MTFDDAK512TBN, MTFDDAK1T0TBN,
MTFDDAK2T0TBN, MTFDDAV256TBN, MTFDDAV512TBN,
MTFDDAV1T0TBN
Features
• Micron
®
3D TLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• TCG/Opal 2.0-compliant self-encrypting drive
(SED)
• Compatible with Microsoft eDrive
®
• Hardware-based AES-256 encryption engine
• ATA modes supported
– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
• Industry-standard, 512-byte sector size support
• Hot-plug/hot-remove capable (2.5")
• Device sleep (DEVSLP), extreme low-power mode
• Native command queuing support with 32-com-
mand slot support
• ATA-8 ACS3 command set compliant
• ATA security feature command set and password
login support
• Secure erase (data page) command set: fast and se-
cure erase
• Sanitize device feature set support
• Self-monitoring, analysis, and reporting technology
(SMART) command set
• Dynamic write acceleration
• Adaptive thermal monitoring
• Power loss protection for data-at-rest
• Performance
1, 2
– PCMark
®
Vantage (HDD test suite score): Up to
84,000
– Sequential 128KB READ: Up to 530 MB/s
– Sequential 128KB WRITE: Up to 500 MB/s
– Random 4KB READ: Up to 55,000 IOPS
– Random 4KB WRITE: Up to 83,000 IOPS
– READ/WRITE latency: 85µs/40µs (TYP)
• Reliability
– MTTF: 1.5 million device hours
3
– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector
per 10
15
bits read
• Low power consumption
– Device Sleep numbers: <4mW
– DIPM numbers: 110mW TYP
4
• Endurance: Total bytes written (TBW)
– 120TB
• Capacity (unformatted): 128GB
• 2.5-inch × 7mm form factor
• Secure firmware update with digitally signed firm-
ware image
• Operating temperature
– Commercial (0°C to +70°C)
5
Notes:
1. Typical I/O performance numbers as meas-
ured fresh-out-of-the-box (FOB) using Iome-
ter with a queue depth of 32 and write
cache enabled.
2. 4 KB transfers used for READ/WRITE latency
values.
3. The product achieves a mean time to failure
(MTTF) based on population statistics not
relevant to individual units.
4. Active average power measured during exe-
cution of MobileMark
®
with DIPM (device-
initiated power management) enabled.
5. Temperature measured by SMART attribute
194.
Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.
1100 2.5-Inch and M.2 NAND Flash SSD
Features
CCMTD-1725822587-10292
1100_ssd.pdf - Rev. C 12/16 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
