Table 10: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
78 Serial ATA features supported
15–12 F 0000b Reserved
11 F 0b 1 = Supports Rebuild Assist
10 F 0b 1 = Supports Device Initiated Interface Power Management
Software Settings Preservation
9 F 0b 1 = Supports Hybrid Information
8 F 1b 1 = Device sleep supported
7 F 0b 1 = Supports NCQ Autosense
6 F 1b 1 = Supports software settings preservation
5 F 0b 1 = HARDWARE FEATURE CONTROL SUPPORTED bit
4 F 0b 1 = Supports in-order data delivery
3 F 1b 1 = Supports device initiate interface power management
2 F 1b 1 = Supports DMA Setup Auto-Activate optimization
1 F 0b 1 = Supports non-zero buffer offsets in DMA Setup FIS
0 F 0b Reserved (set to 0)
79 Serial ATA features enabled
15–12 V 0000b Reserved
11 V 0b 1 = Rebuild Assist enabled
10 V 0b Reserved
9 V 0b 1 = Hybrid Information feature is enabled
8 V 0b 1 = Device sleep enabled
7 V 0b 1 = Device automatic partial to slumber transitions enabled
6 V 1b 1 = Software settings preservation enabled
5 V 0b 1 = Hardware feature control is enabled
4 V 0b 1 = In-order data delivery enabled
3 V 0b 1 = Device initiating interface power management enabled
2 V 0b 1 = DMA Setup Auto-Activate optimization enabled
1 V 0b 1 = Non-zero buffer offsets in DMA Setup FIS enabled
0 V 0b Reserved (set to 0)
1100 2.5-Inch and M.2 NAND Flash SSD
Device ID
CCMTD-1725822587-10292
1100_ssd.pdf - Rev. C 12/16 EN
20
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.