Table 10: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
88 Ultra DMA modes
15 0b Reserved
14 0b 1 = Ultra DMA mode 6 is selected
0 = Ultra DMA mode 6 is not selected
13 0b 1 = Ultra DMA mode 5 is selected
0 = Ultra DMA mode 5 is not selected
12 0b 1 = Ultra DMA mode 4 is selected
0 = Ultra DMA mode 4 is not selected
11 0b 1 = Ultra DMA mode 3 is selected
0 = Ultra DMA mode 3 is not selected
10 0b 1 = Ultra DMA mode 2 is selected
0 = Ultra DMA mode 2 is not selected
9 0b 1 = Ultra DMA mode 1 is selected
0 = Ultra DMA mode 1 is not selected
8 0b 1 = Ultra DMA mode 0 is selected
0 = Ultra DMA mode 0 is not selected
7 0b Reserved
6 1b 1 = Ultra DMA mode 6 and below are supported
5 1b 1 = Ultra DMA mode 5 and below are supported
4 1b 1 = Ultra DMA mode 4 and below are supported
3 1b 1 = Ultra DMA mode 3 and below are supported
2 1b 1 = Ultra DMA mode 2 and below are supported
1 1b 1 = Ultra DMA mode 1 and below are supported
0 1b 1 = Ultra DMA mode 0 IS supported
89 (O)F 0001h Time required for security erase unit completion
90 (O)F 0001h Time required for enhanced security erase completion
91 (O)V 00FEh Current advanced power management value
92 (O)V FFFEh Master Password Identifier
93 F 0000h Shall be 0000h for SATA devices
94 F 0000h Obsolete
95 (O)V 0000h Stream Minimum Request Size
96 (O)V 0000h Streaming Transfer Time – DMA
97 (O)V 0000h Streaming Access Latency – DMA and PIO
98 (O)F 0000h 0000h Streaming Performance Granularity (98-99)
100 V Varies by capacity Maximum user LBA for 48-bit Address feature set
104 (O)V 0000h Streaming Transfer Time – PIO
105 F 0008h Maximum number of 512-byte blocks of LBA Range Entries
per DATA SET MANAGEMENT command
1100 2.5-Inch and M.2 NAND Flash SSD
Device ID
CCMTD-1725822587-10292
1100_ssd.pdf - Rev. C 12/16 EN
25
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.