Table 10: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
169 DATA SET MANAGEMENT command support
15–1 F 000000000000000
b
Reserved
0 F 1b 1 = The Trim bit in the DATA SET MANAGEMENT command is
supported
170 F 0000h 0000h
0000h 0000h
Additional product identifier
174 F 0000h 0000h Reserved
176 (O)V Varies Current media serial number (60 ASCII characters)
206 SCT Command Transport
15–12 X 0000b Vendor-specific
11–6 F 000000b Reserved
5 F 1b SCT Command Transport Data Tables supported
4 F 1b SCT Command Transport Features Control supported
3 F 0b SCT Command Transport Error Recovery Control supported
2 F 1b SCT Command Transport Write Same supported
1 F 0b Obsolete
0 F 1b SCT Command Transport supported
207 F 0000h 0000h Reserved for CE-ATA
209 (O) Alignment of logical blocks within a larger physical block
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13–0 F 00000000000000b Logical sector offset within the first physical sector where the
first logical sector is placed
210 (O)V 0000h 0000h Write-Read-Verify Sector Count Mode 3 Only
212 (O)F 0000h 0001h Verify Sector Count Mode 2 Only
214 (O) 0000h Obsolete
215 (O)V 0000h Obsolete
216 (O)V 0000h Obsolete
217 (M)F 0001h Nominal media rotation rate (ATA8-ACS 1699-D Revision 6)
218 (O)V 0000h Reserved
219 Obsolete
220 15–8 F 00h Reserved
7–0 V 00h Write-Read-Verify feature set current mode
221 0000h Reserved
1100 2.5-Inch and M.2 NAND Flash SSD
Device ID
CCMTD-1725822587-10292
1100_ssd.pdf - Rev. C 12/16 EN
28
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
