Physical Configuration
2.5" 7 mm
Product mass: 56 grams MAX
Physical dimensions conform to the applicable form factor specifications as listed in
the figure below.
Figure 5: 2.5-Inch Package – 7mm
H +0.00/-0.50
L MAX
W ±0.25
(3.50)
(4.80)
(14.00)
(90.60)
(2X M3)
(Both sides)
(3.00)
(14.00)
(90.60)
(61.71)
(4.07)
(4X M3)
Note:
1. All dimensions are in millimeters.
Table 15: 2.5-Inch Package Dimensions
Density (GB) W L H Unit
256
69.85 100.45 7.00 mm
512
1024
2048
Note:
1. Dimension values in millimeter per SFF 8201 Rev. 2.7.
1100 2.5-Inch and M.2 NAND Flash SSD
Physical Configuration
CCMTD-1725822587-10292
1100_ssd.pdf - Rev. C 12/16 EN
37
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
M.2 2280
Product mass: 10 grams MAX
Physical dimensions conform to the applicable form factor specifications as listed in
the figure below.
Figure 6: M.2 Type 2280 Package
Note:
1. All dimensions are in millimeters.
Table 16: M.2 Type 2280 Package Dimensions
Density (GB) Specification W L A B Unit
256
S2
22.00 80.00
1.35
0.80 mm512
1024 S3 1.50
Note:
1. M.2 2280 dimension values in millimeter per PCI Express M.2 Specification Rev. 1.0.
1100 2.5-Inch and M.2 NAND Flash SSD
Physical Configuration
CCMTD-1725822587-10292
1100_ssd.pdf - Rev. C 12/16 EN
38
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.
Compliance
Micron SSDs comply with the following:
Micron Green Standard
Built with sulfur resistant resistors
CE (Europe): EN 55032 Class B, RoHS
FCC: CFR Title 47, Part 15, Class B
UL: UL-60950-1, 2nd Edition
BSMI (Taiwan): approval to CNS 13438
RCM (Australia, New Zealand): AS/NZS CISPR32 Class B
KCC RRL (Korea): approval to KN 32 Class B, KN 35 Class B
W.E.E.E.: compliance with EU WEEE directive 2012/19/EC. Additional obligations
may apply to customers who place these products in the markets where WEEE is en-
forced.
TUV (Germany): approval to IEC60950/EN60950
V
CCI
(Japan): 2011-04 Class B
IC (Canada): CISPR32 Class B
- This Class B digital apparatus complies with Canadian ICES-003.
- Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC Rules
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a partic-
ular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following meas-
ures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
1100 2.5-Inch and M.2 NAND Flash SSD
Compliance
CCMTD-1725822587-10292
1100_ssd.pdf - Rev. C 12/16 EN
39
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2015 Micron Technology, Inc. All rights reserved.

MTFDDAV256TBN-1AR15FCYY

Mfr. #:
Manufacturer:
Micron
Description:
Solid State Drives - SSD 1100 256GB M.2 SSD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union