SUM90140E-GE3

Package Information
www.vishay.com
Vishay Siliconix
Revison: 30-Sep-13
1
Document Number: 71198
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TO-263 (D
2
PAK): 3-LEAD
Notes
1. Plane B includes maximum features of heat sink tab and plastic.
2. No more than 25 % of L1 can fall above seating plane by
max. 8 mils.
3. Pin-to-pin coplanarity max. 4 mils.
4. *: Thin lead is for SUB, SYB.
Thick lead is for SUM, SYM, SQM.
5. Use inches as the primary measurement.
6. This feature is for thick lead.
-A-
-B-
D1
D4
A
A
e
b2
b
E
A
c2
c
L2
D
L3
L
Detail “A”
E1
E2
K
E3
D2
D3
6
0.010
M
A
M
2 PL
DETAIL A (ROTATED 90°)
SECTION A-A
0° - 5°
L1
L4
M
c1
c
b1
b
INCHES MILLIMETERS
DIM. MIN. MAX. MIN. MAX.
A 0.160 0.190 4.064 4.826
b 0.020 0.039 0.508 0.990
b1 0.020 0.035 0.508 0.889
b2 0.045 0.055 1.143 1.397
c*
Thin lead 0.013 0.018 0.330 0.457
Thick lead 0.023 0.028 0.584 0.711
c1
Thin lead 0.013 0.017 0.330 0.431
Thick lead 0.023 0.027 0.584 0.685
c2 0.045 0.055 1.143 1.397
D 0.340 0.380 8.636 9.652
D1 0.220 0.240 5.588 6.096
D2 0.038 0.042 0.965 1.067
D3 0.045 0.055 1.143 1.397
D4 0.044 0.052 1.118 1.321
E 0.380 0.410 9.652 10.414
E1 0.245 - 6.223 -
E2 0.355 0.375 9.017 9.525
E3 0.072 0.078 1.829 1.981
e 0.100 BSC 2.54 BSC
K 0.045 0.055 1.143 1.397
L 0.575 0.625 14.605 15.875
L1 0.090 0.110 2.286 2.794
L2 0.040 0.055 1.016 1.397
L3 0.050 0.070 1.270 1.778
L4 0.010 BSC 0.254 BSC
M - 0.002 - 0.050
ECN: T13-0707-Rev. K, 30-Sep-13
DWG: 5843
AN826
Vishay Siliconix
Document Number: 73397
11-Apr-05
www.vishay.com
1
RECOMMENDED MINIMUM PADS FOR D
2
PAK: 3-Lead
0.635
(16.129)
Recommended Minimum Pads
Dimensions in Inches/(mm)
0.420
(10.668)
0.355
(9.017)
0.145
(3.683)
0.135
(3.429)
0.200
(5.080)
0.050
(1.257)
Return to Index
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

SUM90140E-GE3

Mfr. #:
Manufacturer:
Vishay / Siliconix
Description:
MOSFET 200V Vds 20V Vgs D2PAK (TO-263)
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet