LPC2364_65_66_67_68 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 7.1 — 16 October 2013 14 of 69
NXP Semiconductors
LPC2364/65/66/67/68
Single-chip 16-bit/32-bit microcontrollers
P1[23]/PWM1[4]/
MISO0
37
[1]
K5
[1]
I/O P1[23] — General purpose digital input/output pin.
O PWM1[4] — Pulse Width Modulator 1, channel 4 output.
I/O MISO0 — Master In Slave Out for SSP0.
P1[24]/PWM1[5]/
MOSI0
38
[1]
H5
[1]
I/O P1[24] — General purpose digital input/output pin.
O PWM1[5] — Pulse Width Modulator 1, channel 5 output.
I/O MOSI0 — Master Out Slave in for SSP0.
P1[25]/MAT1[1] 39
[1]
G5
[1]
I/O P1[25] — General purpose digital input/output pin.
O MAT1[1] — Match output for Timer 1, channel 1.
P1[26]/PWM1[6]/
CAP0[0]
40
[1]
K6
[1]
I/O P1[26] — General purpose digital input/output pin.
O PWM1[6] — Pulse Width Modulator 1, channel 6 output.
I CAP0[0] — Capture input for Timer 0, channel 0.
P1[27]/CAP0[1] 43
[1]
K7
[1]
I/O P1[27] — General purpose digital input/output pin.
I CAP0[1] — Capture input for Timer 0, channel 1.
P1[28]/
PCAP1[0]/
MAT0[0]
44
[1]
J7
[1]
I/O P1[28] — General purpose digital input/output pin.
I PCAP1[0] — Capture input for PWM1, channel 0.
O MAT0[0] — Match output for Timer 0, channel 0.
P1[29]/
PCAP1[1]/
MAT0[1]
45
[1]
G6
[1]
I/O P1[29] — General purpose digital input/output pin.
I PCAP1[1] — Capture input for PWM1, channel 1.
O MAT0[1] — Match output for Timer 0, channel 0.
P1[30]/V
BUS
/
AD0[4]
21
[2]
H1
[2]
I/O P1[30] — General purpose digital input/output pin.
I V
BUS
— Monitors the presence of USB bus power. (LPC2364/66/68 only)
Note: This signal must be HIGH for USB reset to occur.
I AD0[4] — A/D converter 0, input 4.
P1[31]/SCK1/
AD0[5]
20
[2]
F4
[2]
I/O P1[31] — General purpose digital input/output pin.
I/O SCK1 — Serial Clock for SSP1.
I AD0[5] — A/D converter 0, input 5.
P2[0] to P2[31] I/O Port 2: Port 2 is a 32-bit I/O port with individual direction controls for each
bit. The operation of Port 2 pins depends upon the pin function selected via
the pin connect block. Pins 14 through 31 of this port are not available.
P2[0]/PWM1[1]/
TXD1/
TRACECLK
75
[1]
B9
[1]
I/O P2[0] — General purpose digital input/output pin.
O PWM1[1] — Pulse Width Modulator 1, channel 1 output.
O TXD1 — Transmitter output for UART1.
O TRACECLK — Trace Clock.
P2[1]/PWM1[2]/
RXD1/
PIPESTAT0
74
[1]
B10
[1]
I/O P2[1] — General purpose digital input/output pin.
O PWM1[2] — Pulse Width Modulator 1, channel 2 output.
I RXD1 — Receiver input for UART1.
O PIPESTAT0 — Pipeline Status, bit 0.
P2[2]/PWM1[3]/
CTS1/
PIPESTAT1
73
[1]
D8
[1]
I/O P2[2] — General purpose digital input/output pin.
O PWM1[3] — Pulse Width Modulator 1, channel 3 output.
I CTS1 — Clear to Send input for UART1.
O PIPESTAT1 — Pipeline Status, bit 1.
Table 4. Pin description
…continued
Symbol Pin Ball Type Description
