KMA215 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2014. All rights reserved.
Product data sheet Rev. 1 — 24 February 2014 43 of 50
NXP Semiconductors
KMA215
Programmable angle sensor with SAE J2716 SENT
15. ElectroStatic Discharge (ESD)
15.1 Human body model (AEC-Q100-002)
The KMA215 is protected up to 8 kV, according to the human body model at 100 pF and
1.5 k. This protection is ensured at all external pins (OUT/DATA, V
DD
and GND).
Classification level: H3B.
Furthermore, all interconnects (pins between package head and package body) must not
be damaged at 2 kV.
Classification level: H2.
15.2 Human metal model (ANSI/ESD SP5.6-2009)
The KMA215 is protected up to 8 kV, according to the human metal model at 150 pF and
330 inside the ESD gun. This test utilizes waveforms of the IEC 61000-4-2 standard on
component level. Apply the contact discharge in an unsupplied state at pins OUT/DATA
and V
DD
referred to GND which is connected directly to the ground plane.
Test setup: A.
Test level: 5.
15.3 Machine model (AEC-Q100-003)
The KMA215 is protected up to 400 V, according to the machine model. This protection is
ensured at all external pins (OUT/DATA, V
DD
and GND).
Classification level: M4.
Furthermore, all interconnects (pins between package head and package body) must not
be damaged at 200 V.
Classification level: M3.
All pins have latch-up protection.
15.4 Charged-device model (AEC-Q100-011)
The KMA215 is protected up to 750 V, according to the charged-device model. This
protection is ensured at all external pins (OUT/DATA, V
DD
and GND).
Classification level: C4.
Furthermore, all interconnects (pins between package head and package body) is
protected up to at 500 V.
Classification level: C3B.
