LT3080-1
22
30801fc
For more information www.linear.com/LT3080-1
MS8E Package
8-Lead Plastic MSOP, Exposed Die Pad
(Reference LTC DWG # 05-08-1662 Rev K)
package DescripTion
Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings.
MSOP (MS8E) 0213 REV K
0.53 ±0.152
(.021 ±.006)
SEATING
PLANE
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
6. EXPOSED PAD DIMENSION DOES INCLUDE MOLD FLASH. MOLD FLASH ON E-PAD
SHALL NOT EXCEED 0.254mm (.010") PER SIDE.
0.18
(.007)
0.254
(.010)
1.10
(.043)
MAX
0.22 – 0.38
(.009 – .015)
TYP
0.86
(.034)
REF
0.65
(.0256)
BSC
0° – 6° TYP
DETAIL “A”
DETAIL “A”
GAUGE PLANE
1 2
3
4
4.90 ±0.152
(.193 ±.006)
8
8
1
BOTTOM VIEW OF
EXPOSED PAD OPTION
7
6
5
3.00 ±0.102
(.118 ±.004)
(NOTE 3)
3.00 ±0.102
(.118 ±.004)
(NOTE 4)
0.52
(.0205)
REF
1.68
(.066)
1.88
(.074)
5.10
(.201)
MIN
3.20 – 3.45
(.126 – .136)
1.68 ±0.102
(.066 ±.004)
1.88 ±0.102
(.074 ±.004)
0.889 ±0.127
(.035 ±.005)
RECOMMENDED SOLDER PAD LAYOUT
0.65
(.0256)
BSC
0.42 ±0.038
(.0165 ±.0015)
TYP
0.1016 ±0.0508
(.004 ±.002)
DETAIL “B”
DETAIL “B”
CORNER TAIL IS PART OF
THE LEADFRAME FEATURE.
FOR REFERENCE ONLY
NO MEASUREMENT PURPOSE
0.05 REF
0.29
REF
MS8E Package
8-Lead Plastic MSOP, Exposed Die Pad
(Reference LTC DWG # 05-08-1662 Rev K)
LT3080-1
23
30801fc
For more information www.linear.com/LT3080-1
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-
tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.
revision hisTory
REV DATE DESCRIPTION PAGE NUMBER
B 9/11 Updated the Absolute Maximum Ratings, Order Information, and Note 2 in the Electrical Characteristics sections to
include I-grade parts.
2, 3
C 5/15 Added diode to shutdown application circuit. 16
(Revision history begins at Rev B)
LT3080-1
24
30801fc
For more information www.linear.com/LT3080-1
LINEAR TECHNOLOGY CORPORATION 2008
LT 0515 REV C • PRINTED IN USA
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900
FAX: (408) 434-0507
www.linear.com/LT3080-1
PART NUMBER DESCRIPTION COMMENTS
LDOs
LT1086 1.5A Low Dropout Regulator Fixed 2.85V, 3.3V, 3.6V, 5V and 12V Output
LT1117 800mA Low Dropout Regulator 1V Dropout, Adjustable or Fixed Output, DD-Pak, SOT-223 Packages
LT1118 800mA Low Dropout Regulator Okay for Sinking and Sourcing, S0-8 and SOT-223 Packages
LT1963A 1.5A Low Noise, Fast Transient
Response LDO
340mV Dropout Voltage, Low Noise = 40µV
RMS
, V
IN
: 2.5V to 20V,
TO-220, DD, SOT-223 and SO-8 Packages
LT1965 1.1A Low Noise LDO 290mV Dropout V
oltage, Low Noise 40µV
RMS
, V
IN
: 1.8V to 20V,
V
OUT
: 1.2V to 19.5V, Stable with Ceramic Caps, TO-220, DDPak, MSOP and 3mm × 3mm
DFN Packages
LTC
®
3026 1.5A Low Input Voltage VLDO™
Regulator
V
IN
: 1.14V to 3.5V (Boost Enabled), 1.14V to 5.5V (with External 5V), V
DO
= 0.1V,
I
Q
= 950µA, Stable with 10µF Ceramic Capacitors, 10-Lead MSOP and DFN Packages
LT3080 1.1A, Parallelable, Low Noise,
Low Dropout Linear Regulator
300mV Dropout V
oltage (2-Supply Operation), Low Noise: 40µV
RMS
, V
IN
: 1.2V to
36V, V
OUT
: 0V to 35.7V, Current-Based Reference with 1-Resistor V
OUT
Set, Directly
Parallelable (No Op Amp Required), Stable with Ceramic Capacitors, TO-220, SOT-223,
MSOP and 3mm × 3mm DFN Packages.
Switching Regulators
LTC3414 4A (I
OUT
), 4MHz Synchronous
Step-Down DC/DC Converter
95% Efficiency, V
IN
: 2.25V to 5.5V, V
OUT(MIN)
= 0.8V, TSSOP Package
LTC3406/LTC3406B 600mA (I
OUT
), 1.5MHz Synchronous
Step-Down DC/DC Converter
95% Efficiency, V
IN
: 2.5V to 5.5V, V
OUT(MIN)
= 0.6V, I
Q
= 20µA,
I
SD
< 1µA, ThinSOT™ Package
LTC3411 1.25A (I
OUT
), 4MHz Synchronous
Step-Down DC/DC Converter
95% Efficiency, V
IN
: 2.5V to 5.5V, V
OUT(MIN)
= 0.8V, I
Q
= 60µA,
I
SD
< 1µA, 10-Lead MS or DFN Packages
Paralleling Regulators
+
LT3080-1
IN
V
IN
4.8V TO 28V
V
CONTROL
OUT
25mΩ
10µF
V
OUT
3.3V
2.2A
30801 TA11
165k
SET
1µF
+
LT3080-1
IN
V
CONTROL
OUT
25mΩ
SET
Typical applicaTion
relaTeD parTs

LT3080EDD-1#PBF

Mfr. #:
Manufacturer:
Analog Devices / Linear Technology
Description:
LDO Voltage Regulators Parallelable 1.1A Adj 1x Res L Drop Reg
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union