AXL E ETH DIO16 M12 6M
8547_en_03 PHOENIX CONTACT 19
13.10 Status register (7996) 13.11 Diagnostic status register (7997)
13.12 Diagnostic parameter register (7998)
This register sends the fault location (channel number) to
where the fault has occurred. The fault location is sent in
group format.
Bit Code
(hex)
Meaning
0 0001 1 An error occurred (e.g., a bit in the
diagnostic register is set). For ad-
ditional information, please refer to
register 2004.
0 No error
1 0002 1 A Net Fail occurred, active substi-
tute values. For additional informa-
tion, please refer to register 2004.
0 No error
2 0004 Reserved
3 0008 Reserved
4 0010 Reserved
5 0020 Reserved
6 0040 Reserved
7 0080 Reserved
8 0100 Reserved
9 0200 Reserved
10 0400 Reserved
11 0800 Reserved
12 1000 Reserved
13 2000 Reserved
14 4000 Reserved
15 8000 Reserved
Bit Code
(hex)
Meaning
0 0001 Short circuit or overload of outputs, for
additional information please refer to
register 7998.
1 0002 Reserved
2 0004 Undervoltage of sensor supply
3 0008 Surge voltage of sensor supply
4 0010 Short circuit or overload of the sensor
supply
5 0020 Reserved
6 0040 Reserved
7 0080 Reserved
8 0100 Reserved
9 0200 Reserved
10 0400 Overtemperature of the device
11 0800 Reserved
12 1000 Reserved
13 2000 Reserved
14 4000 Reserved
15 8000 Reserved
Code (hex) Meaning
0000 A short circuit has not occurred.
0001 Short circuit at one output or several
outputs 1...4
0002 Short circuit at one output or several
outputs 5...8
0003 Short circuit at one output or several
outputs 9...12
0004 Short circuit at one output or several
outputs 13...16
AXL E ETH DIO16 M12 6M
8547_en_03 PHOENIX CONTACT 20
13.13 Figure of process data on Modbus registers 8000 and 9000
Key:
Key:
Key:
13.14 Configuration of digital inputs and outputs
A channel, whether an input or an output, is configured by using the IN or OUT process data according to the channel func-
tion. Parameterization is not necessary.
Process data input word 8000
Byte Byte 0 Byte 1
Bit 7654321076543210
IN 07 06 05 04 03 02 01 00 17 16 15 14 13 12 11 10
Connection X04 X03 X02 X01 X08 X07 X06 X05
Pin 2424242424242424
DI 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9
Bit: Process data assignment
IN: LED marking
DI: Device input
Process data output word 9000
Byte Byte 0 Byte 1
Bit 7654321076543210
OUT 07060504030201001716151413121110
Connection X04 X03 X02 X01 X08 X07 X06 X05
Pin 2424242424242424
DO 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9
Bit: Process data assignment
OUT: LED marking
DO: Device input
Bit: Process data assignment
OUT: LED marking
DO: Device input
If the channel is used as an output, the status of the channel is also mapped to the IN process data.
This can be useful, e.g., for diagnostic purposes.
If the channel is used as an input, the channel cannot simultaneously be used as an output.
AXL E ETH DIO16 M12 6M
8547_en_03 PHOENIX CONTACT 21
14 Startup
14.1 Delivery state/default settings
By default upon delivery, the following functions and fea-
tures are available:
IP settings
Process data watchdog
Firmware update
System identification
Web-based Management (WBM)
14.2 Restoring the default settings
There are two options for resetting the default settings:
Via web-based management, go to the Administration
web page > default settings and follow the instructions.
Via the rotary coding switch, switch position 0F
14.3 Starting the firmware
Once you have connected the power, the firmware is
started.
After completion of the firmware boot process, the NET LED
either lights up or flashes green.
IP parameters: 0.0.0.0
Subnet mask: 0.0.0.0
Default Gateway: 0.0.0.0
BootP: activated
Fault response mode: Reset fault mode:
Process data watchdog tim-
eout: 0 (deactivated)
Confirmation mode: Auto
Firmware update on next
restart: deactivated
TFTP server IP address: 192.168.210.211
Firmware file name: FIRMWARE.NXF
Device name: No name assigned
Description: No description assigned
Device location: No location assigned
Contact: No contact assigned
User name: admin
Password: private

2701539

Mfr. #:
Manufacturer:
Phoenix Contact
Description:
AXL E ETH DIO16 M12 6M
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet