AXL E ETH DIO16 M12 6M
8547_en_03 PHOENIX CONTACT 8
6 Pin assignment
6.1 Ethernet and power supply connection
Figure 2 Connections for Ethernet and voltage supply
6.2 Ethernet pin assignment
Figure 3 Ethernet pin assignment, D-coded
6.3 Pin assignment of the power supply U
S
/U
A
Figure 4 Pin assignment of the power supply, T-coded
Designation Meaning
Port 1 (X21) Ethernet port 1
Port 2 (X22) Ethernet port 2
U
S
IN (X31) Power supply IN
(logic, sensors and actuators)
U
A
IN (X31) Power Supply IN (actuators)
for additional devices
U
S
OUT (X32) Power supply OUT
for additional devices
U
A
OUT (X32) Power supply OUT
for additional devices
Ground the device by means of the mounting
screws of the fixing clips or the mounting plate
or the DIN rail.
Pin Ethernet port 1
(X21)
Ethernet port 2
(X22)
1TX+ TX+
2RX+ RX+
3TX- TX-
4RX- RX-
The shield is connected to FE in the device.
The thread is used for additional shielding.
Pin IN OUT Conductor
colors
1+24 V DC (U
S
) +24 V DC (U
S
)Brown
2GND (U
A
)GND (U
A
)White
3GND (U
S
)GND (U
S
)Blue
4+24 V DC (U
A
) +24 V DC (U
A
)Black
