2013 - 2015 Microchip Technology Inc. DS00001726B-page 31
USB2422
4.4.25 SERIAL STRING REGISTERS (SERSTR)
4.4.26 BATTERY CHARGING ENABLE REGISTER (BC_EN)
4.4.27 BOOST UPSTREAM REGISTER (BOOSTUP)
Address: 92h-CFh Size: 8 bits
Bits Description Type Default
7:0 Serial String (SER_STR)
UNICODE UTF-16LE per USB 2.0 Specification.
Maximum string length is 31 characters (62 Bytes).
Note: The String consists of individual 16 Bit UNICODE UTF-16LE
characters. The Characters will be stored starting with the LSB at
the least significant address and the MSB at the next 8-bit location
(subsequent characters must be stored in sequential contiguous
address in the same LSB, MSB manner).
R/W 00h
Address: D0h Size: 8 bits
Bits Description Type Default
7:0 Battery Charging Enable (BC_EN)
Enables the battery charging feature for the corresponding port.
0 = Battery Charging support is not enabled
1 = Battery charging support is enabled
Bit 7= Reserved
Bit 6= Reserved
Bit 5= Reserved
Bit 4= Reserved
Bit 3= Reserved
Bit 2= Port 2 Battery Charging Enable
Bit 1= Port 1 Battery Charging Enable
Bit 0= Reserved
R/W 00h
Address: F6h Size: 8 bits
Bits Description Type Default
7:2 RESERVED --
1:0 Boost Upstream (BOOST_IOUT_A)
USB electrical signaling drive strength Boost Bit for Upstream Port 'A'.
00 = Normal electrical drive strength
01 = Elevated electrical drive strength (+4% boost)
10 = Elevated electrical drive strength (+8% boost)
11 = Elevated electrical drive strength (+12% boost)
R/W 00b
USB2422
DS00001726B-page 32 2013 - 2015 Microchip Technology Inc.
4.4.28 BOOST DOWNSTREAM REGISTER (BOOST40)
4.4.29 PORT SWAP REGISTER (PRTSP)
Address: F8h Size: 8 bits
Bits Description Type Default
7:4 RESERVED --
3:2 Boost Downstream Port 2 (BOOST_IOUT_2)
USB electrical signaling drive strength Boost Bit for Upstream Port '2'.
00 = Normal electrical drive strength
01 = Elevated electrical drive strength (+4% boost)
10 = Elevated electrical drive strength (+8% boost)
11 = Elevated electrical drive strength (+12% boost)
R/W 00b
1:0 Boost Downstream Port 1 (BOOST_IOUT_1)
USB electrical signaling drive strength Boost Bit for Upstream Port '1'.
00 = Normal electrical drive strength
01 = Elevated electrical drive strength (+4% boost)
10 = Elevated electrical drive strength (+8% boost)
11 = Elevated electrical drive strength (+12% boost)
R/W 00b
Address: FAh Size: 8 bits
Bits Description Type Default
7:0 Port Swap (PRTSP)
Swaps the Upstream and Downstream USB DP and DM Pins for ease of
board routing to devices and connectors.
0 = USB D+ functionality is associated with the DP pin and D- functionality
is associated with the DM pin.
1 = USB D+ functionality is associated with the DM pin and D- functionality
is associated with the DP pin
Bit 7= Reserved
Bit 6= Reserved
Bit 5= Reserved
Bit 4= Reserved
Bit 3= Reserved
Bit 2= Port 2 DP/DM Swap
Bit 1= Port 1 DP/DM Swap
Bit 0= Upstream Port DP/DM Swap
R/W 00h
2013 - 2015 Microchip Technology Inc. DS00001726B-page 33
USB2422
4.4.30 PORT 1/2 REMAP REGISTER (PRTR12)
Address: FBh Size: 8 bits
Bits Description Type Default
7:0 Port 1/2 Remap (PRTR12)
When a hub is enumerated by a USB Host Controller, the hub is only
permitted to report how many ports it has, the hub is not permitted to select
a numerical range or assignment. The Host Controller will number the
downstream ports of the hub starting with the number '1', up to the number
of ports that the hub reported as having.
The host's port number is referred to as “Logical Port Number” and the
physical port on the hub is the “Physical Port Number”. When remapping
mode is enabled (PRTMAP_EN in the Configuration Data Byte 3 Register
(CFG3)), the hub's downstream port numbers can be remapped to different
logical port numbers assigned by the host.
Note: The OEM must ensure that Contiguous Logical Port Numbers are
used, starting from one up to the maximum number of enabled
ports. This ensures that the hub's ports are numbered in
accordance with the way a Host will communicate with the ports.
R/W 00h
Bits[7:4] = 0000 Physical Port 2 is disabled
0001 Physical Port 2 is mapped to Logical Port 1
0010 Physical Port 2 is mapped to Logical Port 2
0011
to
1111
RESERVED
Will default to 0000 value.
Bits[3:0] = 0000 Physical Port 1 is disabled
0001 Physical Port 1 is mapped to Logical Port 1
0010 Physical Port 1 is mapped to Logical Port 2
0011
to
1111
RESERVED
Will default to 0000 value.

USB2422T-I/MJ

Mfr. #:
Manufacturer:
Microchip Technology
Description:
USB Interface IC Low Pin Count 2-Port USB 2.0 Hi-Speed Hub Controller
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet