Terminal Tip
5
Index Area
(Dń2 Eń2)
Exposed Pad
8
-B-
D
D/2
E/2
-A-
E
Caaa 2 X
Top View
AA1 A3
-C-
Seating Plane
Side View
BB
DD
AA
CC
Detail A
C0.08
Nx
9
Cccc//
D2
D2/2
Detail B
(NE-1) x e
6
N L
E2/2
E2
Detail A
2
1
N-1N
(ND-1) x e
8
Bottom View
Cbbb
M
A B
N b
5
Datum A or B
N r
e
Terminal Tip
5
Even Terminal/Side Odd Terminal/Side
Detail B
e
e/2
4
Caaa 2 X
Package Information
Vishay Siliconix
Document Number: 72802
16-May-05
www.vishay.com
1
PowerPAKr MLP44-16 (POWER IC ONLY)
JEDEC Part Number: MO-220
NOTES:
1. Dimensioning and tolerancing conform to ASME Y14.5M-1994.
2. All dimensions are in millimeters. All angels are in degrees.
3. N is the total number of terminals.
4. The terminal #1 identifier and terminal numbering convention shall conform to JESD 95-1 SPP-012. Details of terminal #1 identifier are optional, but must
be located within the zone indicated. The terminal #1 identifier may be either a molded or marked feature. The X and Y dimension will vary according to
lead counts.
5. Dimension b applies to metallized terminal and is measured between 0.25 mm and 0.30 mm from the terminal tip.
6. ND and NE refer to the number of terminals on the D and E side respectively.
7. Depopulation is possible in a symmetrical fashion.
8. Variation HHD is shown for illustration only.
9. Coplanarity applies to the exposed heat sink slug as well as the terminals.
Package Information
Vishay Siliconix
www.vishay.com
2
Document Number: 72802
16-May-05
PowerPAKr MLP44-16 (Power IC Only)
JEDEC Part Number: MO-220
MILLIMETERS* INCHES
Dim Min Nom Max Min Nom Max
Notes
A 0.80 0.90 1.00 0.0315 0.0354 0.0394
A1 0 0.02 0.05 0 0.0008 0.0020
A3 0.20 Ref 0.0079
AA 0.345 0.0136
aaa 0.15 0.0059
BB 0.345 0.0136
b 0.25 0.30 0.35 0.0098 0.0118 0.138 5
bbb 0.10 0.0039
CC 0.18 0.0071
ccc 0.10 0.0039
D 4.00 BSC 0.1575 BSC
D2 2.55 2.7 2.8 0.1004 0.1063 0.1102
DD 0.18 0.0071
E 4.00 BSC 0.1575 BSC
E2 2.55 2.7 2.8 0.1004 0.1063 0.1102
e 0.65 BSC 0.0256 BSC
L 0.3 0.4 0.5 0.0118 0.0157 0.0197
N 16 16 3, 7
ND 4 4 6
NE 4 4 6
r b(min)/2 b(min)/2
* Use millimeters as the primary measurement.
ECN: S-50794—Rev. B, 16-May-05
DWG: 5905
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

SIP11204DLP-T1-E3

Mfr. #:
Manufacturer:
Vishay / Siliconix
Description:
Switching Controllers Sec Sync Rect Ctrl w/Overvolt Protect
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet