1
®
FN8085.8
ISL1208
I
2
C
®
Real Time Clock/Calendar
Low Power RTC with Battery Backed
SRAM
The ISL1208 device is a low power real time clock with
timing and crystal compensation, clock/calendar, power fail
indicator, periodic or polled alarm, intelligent battery backup
switching and battery-backed user SRAM.
The oscillator uses an external, low-cost 32.768kHz crystal.
The real time clock tracks time with separate registers for
hours, minutes, and seconds. The device has calendar
registers for date, month, year and day of the week. The
calendar is accurate through 2099, with automatic leap year
correction.
Pinout
ISL1208
(8 LD MSOP, SOIC)
TOP VIEW
ISL1208
(8 LD TDFN)
TOP VIEW
Features
Real Time Clock/Calendar
- Tracks Time in Hours, Minutes, and Seconds
- Day of the Week, Day, Month, and Year
15 Selectable Frequency Outputs
Single Alarm
- Settable to the Second, Minute, Hour, Day of the Week,
Day, or Month
- Single Event or Pulse Interrupt Mode
Automatic Backup to Battery or Super Capacitor
Power Failure Detection
On-Chip Oscillator Compensation
2 Bytes Battery-Backed User SRAM
•I
2
C Interface
- 400kHz Data Transfer Rate
400nA Battery Supply Current
Same Pin Out as ST M41Txx and Maxim DS13xx Devices
Small Package Options
- 8 Ld MSOP and SOIC Packages
- 8 Ld TDFN Package
Pb-Free Available (RoHS Compliant)
Applications
Utility Meters
HVAC Equipment
Audio/Video Components
Set-Top Box/Television
Modems
Network Routers, Hubs, Switches, Bridges
Cellular Infrastructure Equipment
Fixed Broadband Wireless Equipment
Pagers/PDA
POS Equipment
Test Meters/Fixtures
Office Automation (Copiers, Fax)
Home Appliances
Computer Products
Other Industrial/Medical/Automotive
1
2
3
4
8
7
X1
X2
VBAT
VDD
IRQ
/FOUT
SCL
SDA
GND
5
6
2
3
4
1
7
6
5
8
X1
X2
VBAT
GND
VDD
IRQ
/FOUT
SCL
SDA
Data Sheet September 12, 2008
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004-2006, 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
2
FN8085.8
September 12, 2008
.
Block Diagram
Ordering Information
PART NUMBER PART MARKING
V
DD
RANGE
(V)
TEMP. RANGE
(°C) PACKAGE PKG. DWG. #
ISL1208IU8 AGS 2.7 to 5.5 -40 to +85 8 Ld MSOP M8.118
ISL1208IU8-TK* AGS 2.7 to 5.5 -40 to +85 8 Ld MSOP Tape and
Reel
M8.118
ISL1208IU8Z (Note) ANW 2.7 to 5.5 -40 to +85 8 Ld MSOP (Pb-free) M8.118
ISL1208IU8Z-TK*
(Note)
ANW 2.7 to 5.5 -40 to +85 8 Ld MSOP
Tape and Reel
(Pb-free)
M8.118
ISL1208IB8 1208 I 2.7 to 5.5 -40 to +85 8 Ld SOIC MDP0027
ISL1208IB8-TK* 1208 I 2.7 to 5.5 -40 to +85 8 Ld SOIC Tape and Reel MDP0027
ISL1208IB8Z
(Note)
1208 ZI 2.7 to 5.5 -40 to +85 8 Ld SOIC (Pb-free) MDP0027
ISL1208IB8Z-TK*
(Note)
1208 ZI 2.7 to 5.5 -40 to +85 8 Ld SOIC
Tape andReel (Pb-free)
MDP0027
ISL1208IRT8Z
(Note)
08TZ 2.7 to 5.5 -40 to +85 8 Ld TDFN
(Pb-free)
L8.3x3A
ISL1208IRT8Z-TK*
(Note)
08TZ 2.7 to 5.5 -40 to +85 8 Ld TDFN
Tape and Reel (Pb-free)
L8.3x3A
*Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
I
2
C
INTERFACE
RTC
CONTROL
LOGIC
ALARM
FREQUENCY
OUT
RTC
DIVIDER
SDA
BUFFER
CRYSTAL
OSCILLATOR
POR
SWITCH
SCL
BUFFER
SDA
SCL
X1
X2
V
DD
V
BAT
IRQ/
F
OUT
INTERNAL
SUPPLY
V
TRIP
SECONDS
MINUTES
HOURS
DAY OF WEEK
DATE
MONTH
YEAR
USER
SRAM
CONTROL
REGISTERS
ISL1208
3
FN8085.8
September 12, 2008
Pin Descriptions
PIN
NUMBER SYMBOL DESCRIPTION
1 X1 The X1 pin is the input of an inverting amplifier and is intended to be connected to one pin of an external 32.768kHz quartz
crystal. X1 can also be driven directly from a 32.768kHz source.
2 X2 The X2 pin is the output of an inverting amplifier and is intended to be connected to one pin of an external 32.768kHz quartz
crystal.
3 VBAT This input provides a backup supply voltage to the device. V
BAT
supplies power to the device in the event that the V
DD
supply
fails. This pin should be tied to ground if not used.
4 GND Ground
5 SDA Serial Data (SDA) is a bidirectional pin used to transfer serial data into and out of the device. It has an open drain output and
may be wire OR’ed with other open drain or open collector outputs.
6 SCL The Serial Clock (SCL) input is used to clock all serial data into and out of the device.
7IRQ
/FOUT Interrupt Output/Frequency Output is a multi-functional pin that can be used as interrupt or frequency output pin. The function
is set via the configuration register.
8 VDD Power supply
ISL1208

ISL1208IRT8Z-TK

Mfr. #:
Manufacturer:
Renesas / Intersil
Description:
Real Time Clock I2CAL TIME CLK/CLNDR 8LD 3X3
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union