NXP Semiconductors
SL2S2602
ICODE SLIX2
SL2S2602 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2017. All rights reserved.
Product data sheet Rev. 4.1 — 25 July 2017
COMPANY PUBLIC 276341 29 / 55
Table 48. QUIET and PERSISTANT QUIET bit in Extended options
QUIET bit [6] PERSISTENT
QUIET bit [7]
Feature
0 0 remain in current state
1 0 go to Quiet State after response (refer to Section 9.5.1.2 "STAY QUIET")
0 1 go to Persistent Quiet State after Response (refer to Section 9.5.3.19 "STAY QUIET
PERSISTENT")
1 1 only tags in the PERSISTENT QUIET state will respond to the command
If the option flag in the request is set to 1 the response contains the truncated or
complete UID depending on the extended option flag 2.
If the option flag in the request is set to 0 the UID is not part of the response.
Table 49. Inventory Read (extended mode) response format: Option flag logic 1
SOF Flags Optional truncated UID OR
complete UID
Optional data CRC16 EOF
- 8 bits 0 to 64 bit Block length 16 bits -
Multiple of 8 bits Repeated as needed
The mechanism and timing of the INVENTORY READ command performs the same as
at the INVENTORY command which is described in clause 8 of ISO/IEC 15693-3.
If the UID is requested in the truncated format the re-transmitted UID can be calculated
as follows:
16 slots: 64 - 4 - mask length rounded up to the next byte boundary
1 slot: 64 - mask length rounded up to the next byte boundary
Example: mask length = 30
Returned: 64 - 4 - 30 = 30 gives 4 bytes
Table 50. Example
Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 UID
transmitted by
Interrogator
mask value incl. padding with zeros
returned value transmitted by
ICODE SLIX2 IC
8.4.3.10.3 Addressed and selected mode
The INVENTORY READ command can also be transmitted in the addressed or selected
mode. In this case the Inventory_flag is set to 0 and the meaning of flags 5 to 8 is in
accordance with table 4 in ISO/IEC 15693-3.
In the addressed or selected mode the INVENTORY READ command behaves similar to
a READ or READ MULTIPLE BLOCK command.
In the addressed mode it is recommended to address the label IC with a mask length of
64 and to transmit the complete UID in the mask value field.