OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

FUSB307BMPX

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P45P46-P48P49-P51P52-P54P55-P57
© Semiconductor Components Industries, LLC, 2016
April, 2018 − Rev. 3
1 Publication Order Number:
FUSB307B/D
FUSB307B
USB Type-C Port Controller
with USB-PD
Description
The FUSB307B targets system designers looking to implement up
to four USB Type−C port controllers (TCPC) with USB−PD
capabilities.
This solution provides integrated Type−C Rev 1.3 detection
circuitry enabling manual attach/detach detection. Time critical Power
Delivery functionality is handled autonomously, offloading the
μProcessor or Type−C Port Manager (TCPM).
The FUSB307B complies with the USB−PD Interface Specification
Rev 1.0 as a TCPC for a standardized interface with TCPM.
Features
• USB−PD Interface Specification Rev 1.0 Ver. 1.2 Compatible
• USB Type−C Rev 1.3 Compatible
• USB−PD Rev3.0 Ver. 1.1 Compatible
• Fast Role Swap
• Sink Transmit
• Extended Data Messages (Chunked)
• Dual−Role Functionality
♦ Manual Type−C Detection
♦ Automatic DRP Toggling
• USB−PD Interface Specification Support
♦ Automatic GoodCRC Packet Response
♦ Automatic Retries of Sending Packet
♦ All SOP* Types Supported
• VBUS Source and Sink Control
• Integrated 3 W Capable VCONN to CCx Switch
• 10−bit VBUS ADC
• Programmable GPIOs
• 4 Selectable I
2
C Addresses
Figure 1. FUSB307B Block Diagram
www.onsemi.com
SCALE 3:1
WQFN16 3 x 3, 0.5P
CASE 510BS
ORDERING INFORMATION
8
DBG_N
GND
4
ORIENT
3 CC2
2
VCONN
1 CC1
9 GPIO2
10 INT_N
11 SCL1
12 SDA1
7
VDD
6
VBUS
5
LDO
13
SRC
14
SNK
15
GND
16
GPIO1
Top Through
View
QFN16
See detailed ordering and shipping information on page 3 o
f
this data sheet.
F
eatures (continued)
• Dead Battery Operation
♦ Powered from VBUS
♦ LDO Output Provides Power to TCPM
• Packaging:
♦ FUSB307B− 16 Pin QFN
A
pplications
• Smartphones and Tablets
• Digital Cameras
• Desktops and Laptops
• Rechargeable Docks/Speakers
• Wall Adapters
• Automotive
PIN ASSIGNMENT
FUSB307B
www.onsemi.com
2
Table of Contents
Description 1.............................................................................................
Features 1................................................................................................
Applications 1.............................................................................................
Typical Application 3.......................................................................................
Block Diagram 4..........................................................................................
Pin Configurations 4.......................................................................................
Pin Descriptions 5.........................................................................................
Power Up, Initialization and Reset 5..........................................................................
Dead Battery Power−up 6..................................................................................
Programmable GPIOx 6....................................................................................
Standard Outputs 6........................................................................................
I
2
C Interface 7............................................................................................
I
2
C Address Selection 7....................................................................................
Interrupt Operation 7.......................................................................................
I
2
C Idle Mode 7...........................................................................................
VCONN Control 7.........................................................................................
Debug Accessory Support 8................................................................................
Type−C Manual Mode Detection 8...........................................................................
BMC Power Delivery 10....................................................................................
Transmit State Machine 11..................................................................................
Hard Reset/ Cable Reset State Machine 12...................................................................
Automatic GoodCRC Response 12..........................................................................
BIST Mode 12............................................................................................
VBUS Source and Sink Control 12...........................................................................
Voltage Transitions 13......................................................................................
VBUS Monitoring and Measurement 15.......................................................................
VBUS Discharge 15.......................................................................................
Automatic Source Discharge after a Disconnect 15.............................................................
Automatic Sink Discharge after a Disconnect 16...............................................................
Sink Discharge during a Connection 17.......................................................................
Watchdog Timer 17........................................................................................
USB−PD Rev 3.0 Features 18...............................................................................
Fast Role Swap 18........................................................................................
Fast Role Swap Cable Disconnect (Informational Only) 19......................................................
DC and Transient Characteristics 21.........................................................................
FUSB307B
www.onsemi.com
3
Table 1. ORDERING INFORMATION
Part Number
Operating
Temperature Range
Package Packing Method†
FUSB307BMPX −40 to 85°C
16–Lead Molded Leadless Package (QFN)
JEDEC, ML220, 3 mm Square
Tape and Reel
FUSB307BVMPX Automotive
−40 to 105°C
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification Brochure, BRD8011/D.
Typical Application
Figure 2. FUSB307B Typical Mobile Computing Application
CC2
CC1
INT_N
SDA
SCL
Type−C
receptacle
FUSB307B
GND
VCONN
VDD
VBUS
TCPM
USB
2.0 &
3.1
Gen1
PHY
USB Buck/Boost
Charger
+ VBUS Buck
+ VCONN Buck
Battery
SNK
VBAT
V3P3
VCONN
VSNK
VSRC
FPF2895
SRC
I2C_ADDR_SEL/
ORIENT
GPO1
GPU
LDO
VDD
FPF2895
EN
FUSB340
2:1 USB3.1 Switch
GPO2
DEBUG_N
30 mΩ
V
OUT
V
IN
ISET
ON
1 μF
25 V
30 mΩ
V
IN
V
OUT
10 μF
10 μF
25 V
1 μF
10 μF
1 μF
220 pF
220 pF
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P24P25-P27P28-P30P31-P33P34-P36P37-P39P40-P42P43-P45P46-P48P49-P51P52-P54P55-P57

FUSB307BMPX

Mfr. #:
Buy FUSB307BMPX
Manufacturer:
ON Semiconductor
Description:
USB Interface IC USB-C TCPC PORT CONT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet