ACPL-312U-000E
Wide Operating Temperature IGBT Gate Drive
with R
2
Coupler™ Isolation and 2.5 Amp Output Current
Data Sheet
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Description
The ACPL-312U device contains an AlGaAs LED. The LED
is optically coupled to an integrated circuit with a power
output stage. This wide operating temperature optocou-
pler is ideally suited for driving power IGBTs and MOSFETs
used in wide operating temperature motor control
inverter and DC-DC converters applications. The high
operating voltage range of the output stage provides the
drive voltages required by gate controlled devices. The
voltage and current supplied by these optocouplers make
them ideally suited for directly driving IGBTs with ratings
up to 1200 V/100 A. For IGBTs with higher ratings, the
ACPL-312U series can be used to drive a discrete power
stage which drives the IGBT gate.
Avago R
2
Coupler isolation products provide the rein-
forced insulation and reliability needed for critical in auto-
motive and high temperature industrial applications.
Functional Diagram
Features
• 2.5 A maximum peak output current
• 2.0 A minimum peak output current
• 25 kV/μs minimum Common Mode Rejection (CMR) at
V
CM
= 1500 V
• 0.5 V maximum low level output voltage (V
OL
) – Elimi-
nates need for negative gate drive
• I
CC
= 5 mA maximum supply current
• Under Voltage Lock-Out protection (UVLO) with
hysteresis
• Wide operating V
CC
range: 15 to 30 Volts
• 500 ns maximum switching speeds
• Wide temperature range:
- -40°C to 125°C
• Safety Approval:
- UL Recognized 3750 Vrms for 1 min.
- CSA
- IEC/EN/DIN EN 60747-5-5 Viorm = 630 Vpeak
Applications
• IGBT/MOSFET Gate Drive
• AC and Brushless DC Motor Drives
• Industrial Inverters Systems
• Switching power supplies
TRUTH TABLE
LED
V
CC
- V
EE
“POSITIVE GOING”
(i.e., TURN-ON)
V
CC
- V
EE
“NEGATIVE GOING”
(i.e., TURN-OFF) V
O
OFF 0 - 30 V 0 - 30 V LOW
ON 0 - 11 V 0 - 9.5 V LOW
ON 11 - 13.5 V 9.5 - 12 V TRANSITION
ON 13.5 - 30 V 12 - 30 V HIGH
1
3
SHIELD
2
4
8
6
7
5
N/ C
CATHODE
ANODE
N/C
V
CC
V
O
V
O
V
EE
ACPL-312U-000E
A 0.1 μF bypass capacitor must be connected between pins 5 and 8.
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product