Spec.No. JENF243H-9101A-01 P 4/ 13
MURATA MFG.CO.,LTD.
Reference Only
8. Q200 Requirement
8-1. Performance (based on Table 13 for Ferrite EMI SUPPRESSORS/FILTERS)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No. Stress Test Method
3 High
Temperature
Exposure
(Storage)
1000hours at 125C
Set for 24hours
at room temperature,
then measured.
Meet Table A after testing.
4 Temperature
Cycling
1000cycles(-55C to 125C)
Measurement at 24±2 hours
after test conclusion.
Meet Table A after testing.
5 Destructive
Physical
Analysis
Per EIA469
No electrical tests
Not Applicable
7 Biased
Humidity
1000hours 85C/85%RH.
Apply Maximum rated Voltage.
Measurement at 24+/-2 hours
after test conclusion.
Meet Table B after testing.
8 Operational Life 1000hours at 125C
Apply Maximum rated Voltage.
Measurement at 24+/-2 hours
after test conclusion.
Meet Table A after testing.
9 External Visual Visual inspection No abnormalities
10 Physical
Dimension
Meet ITEM 4
(Style and Dimensions)
No defects
12 Resistance
to Solvents
Per MIL-STD-202 Method 215 Not Applicable
13 Mechanical
Shock
Per MIL-STD-202 Method 213
Figure 1 of Method 213.
Condition
F(1500g's/0.5ms/Half sine)
Three times each 6 direction.
Meet Table C after testing.
14 Vibration 5g's for 20 minutes, 12cycles
each of 3 oritentations
Osscillation Frequency :
10-2000Hz.
Meet Table C after testing.
15 Resistance
to Soldering
Heat
No heating.
260C +/- degree C
Immersion time 10s
Pre-heating: 150C+/-5C, 60s+/-5s
Meet Table D after testing.
17 ESD
Per AEC-Q200-002 Meet Table C after testing.
ESD Rank: Refer to Item 3. Rating.
18 Solderbility Per J-STD-002 Method b : Not Applicable
75% of the terminations is to be soldered.
19 Electrical
Characterization
Measured :Capacitance No defects
20 Flammability Per UL-94 Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Meet Table D after testing.
22 Terminal
Strength
Per AEC-Q200-006
A force of 17.7N
for 60sec
17.7N for 60sec
No defects
30 Electrical
Transient
Conduction
Per ISO-7637-2 Not Applicable
