September 2013 Doc ID 12266 Rev 7 1/37
1
VND5050J-E
VND5050K-E
Double channel high side driver
for automotive applications
Features
Main
Inrush current active management by
power limitation
Very low standby current
3.0 V CMOS compatible input
Optimized electromagnetic emission
Very low electromagnetic susceptibility
In compliance with the 2002/95/EC
European directive
Diagnostic functions
Open drain status output
On-state open load detection
Off-state open load detection
Thermal shutdown indication
Protections
Undervoltage shutdown
Overvoltage clamp
Output stuck to V
CC
detection
Load current limitation
Self limiting of fast thermal transients
Protection against loss of ground and loss
of V
CC
Thermal shutdown
Reverse battery protection (see Figure 28)
Electrostatic discharge protection
Applications
All types of resistive, inductive and capacitive
loads
Description
The VND5050K-E and VND5050J-E are
monolithic devices made using
STMicroelectronics VIPower M0-5 technology.
they are intended for driving resistive or inductive
loads with one side connected to ground. Active
V
CC
pin voltage clamp protects the devices
against low energy spikes (see ISO7637 transient
compatibility table). The devices detect open load
condition both in on and off-state, when
STAT_DIS is left open or driven low. Output
shorted to V
CC
is detected in the off-state.
When STAT_DIS is driven high, STATUS pin is in
high impedance state.
Output current limitation protects the devices in
overload condition. In case of long overload
duration, the devices limit the dissipated power to
a safe level up to thermal shutdown intervention.
Thermal shutdown with automatic restart allows
the devices to recover normal operation as soon
as fault conditions disappear.
Max supply voltage V
CC
41 V
Operating voltage range V
CC
4.5 to 36 V
Max on-State resistance (per ch.) R
ON
50 m
Ω
Current limitation (typ) I
LIMH
18 A
Off-state supply current I
S
A
(1)
1. Typical value with all loads connected.
PowerSSO-24PowerSSO-12
Table 1. Device summary
Package
Order code
Tube Tape and reel
PowerSSO-12 VND5050J-E VND5050JTR-E
PowerSSO-24 VND5050K-E VND5050KTR-E
www.st.com
Contents VND5050J-E / VND5050K-E
2/37 Doc ID 12266 Rev 7
Contents
1 Block diagram and pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.1 GND protection network against reverse battery . . . . . . . . . . . . . . . . . . . 20
3.1.1 Solution 1: resistor in the ground line (RGND only) . . . . . . . . . . . . . . . . 20
3.1.2 Solution 2: a diode (DGND) in the ground line . . . . . . . . . . . . . . . . . . . 21
3.2 Load dump protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.3 Microcontroller I/Os protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.4 Open-load detection in off-state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.5 Maximum demagnetization energy (VCC = 13.5V) . . . . . . . . . . . . . . . . . 23
4 Package and PCB thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.1 PowerSSO-12™ thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.2 PowerSSO-24™ thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5 Package and packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.1 ECOPACK
®
packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.2 PowerSSO-12™ package information . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.3 PowerSSO-24™ package information . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.4 PowerSSO-12™ packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
5.5 PowerSSO-24™ packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
VND5050J-E / VND5050K-E List of tables
Doc ID 12266 Rev 7 3/37
List of tables
Table 2. Pin function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Table 3. Suggested connections for unused and not connected pins . . . . . . . . . . . . . . . . . . . . . . . . 6
Table 4. Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 5. Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table 6. Power section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table 7. Switching (VCC = 13V; Tj = 25°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 8. Status pin (V
SD
=0V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 9. Protections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 10. Openload detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 11. Logic input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 12. Truth table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Table 13. Electrical transient requirements (part 1/3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 14. Electrical transient requirements (part 2/3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 15. Electrical transient requirements (part 3/3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Table 16. PowerSSO-12™ thermal parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Table 17. PowerSSO-24™ thermal parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Table 18. PowerSSO-12™ mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Table 19. PowerSSO-24™ mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Table 20. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

VND5050JTR-E

Mfr. #:
Manufacturer:
STMicroelectronics
Description:
Power Switch ICs - Power Distribution Double Ch Hi Side Driver auto
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet