3
AT42QT1060 [DATASHEET]
9505H–AT42–04/2015
I Input only O Output only, push-pull I/O Input/output
OD Open drain output P Ground or power
14 SNS4 I/O To Cs Capacitor Leave open
15 SNS5 I/O To Cs Capacitor Leave open
16 VDD P Positive power pin
17 VDD P Positive power pin
18 VSS P Ground power pin
19 IO0 I/O I/O Port Pin 0 Leave open and set as output
20 IO1 I/O I/O Port Pin 1 Leave open and set as output
21 IO2 I/O I/O Port Pin 2 Leave open and set as output
22 CHG OD Change line Leave open
23 SDA OD I
2
C Data line
Resistor to Vdd or
Vss only in standalone mode
24 SCL OD I
2
C Clock Line
Resistor to Vdd or
Vdd only in standalone mode
25 RST I Reset, active low Vdd
26 IO3 I/O I/O Port Pin 3 Leave open and set as output
27 IO4 I/O I/O Port Pin 4 Leave open and set as output
28 SNS0K I/O To Cs capacitor and to key Leave open
Table 1-1. Pin Allocation (Continued)
Pin Name Type Description If Unused, Connect To...