IN
Trilevel input to select High BW, Bypass or Low BW mode.
See PLL Operating Mode Table for Details.
3 FB_DNC DNC
True clock of differential feedback. The feedback output and feedback input are connected
internally on this pin. Do not connect anything to this pin.
4 FB_DNC# DNC
Complement clock of differential feedback. The feedback output and feedback input are
connected internally on this pin. Do not connect anything to this pin.
5 VDDR1.8 PWR
1.8V power for differential input clock (receiver). This VDD should be treated as an Analog
power rail and filtered appropriately.
6 CLK_IN IN True Input for differential reference clock.
7 CLK_IN# IN Complementary Input for differential reference clock.
8 GNDDIG GND Ground pin for digital circuitry
9 SCLK_3.3 IN Clock pin of SMBus circuitry, 3.3V tolerant.
10 SDATA_3.3 I/O Data pin for SMBus circuitry, 3.3V tolerant.
11 VDDDIG1.8 PWR 1.8V digital power (dirty power)
12 VDDIO PWR Power supply for differential outputs
13 vOE0# IN
Active low input for enabling DIF pair 0. This pin has an internal pull-down.
1 =disable outputs, 0 = enable outputs
14 DIF0 OUT Differential true clock output
15 DIF0# OUT Differential Complementary clock output
16 VDD1.8 PWR Power supply, nominal 1.8V
17 VDDIO PWR Power supply for differential outputs
18 DIF1 OUT Differential true clock output
19 DIF1# OUT Differential Complementary clock output
20 NC N/A No Connection.
21 vOE1# IN
Active low input for enabling DIF pair 1. This pin has an internal pull-down.
1 =disable outputs, 0 = enable outputs
22 DIF2 OUT Differential true clock output
23 DIF2# OUT Differential Complementary clock output
24 vOE2# IN
Active low input for enabling DIF pair 2. This pin has an internal pull-down.
1 =disable outputs, 0 = enable outputs
25 VDDA1.8 PWR 1.8V power for the PLL core.
26 VDDIO PWR Power supply for differential outputs
27 DIF3 OUT Differential true clock output
28 DIF3# OUT Differential Complementary clock output
29 vOE3# IN
Active low input for enabling DIF pair 3. This pin has an internal pull-down.
1 =disable outputs, 0 = enable outputs
30 NC N/A No Connection.
31 VDD1.8 PWR Power supply, nominal 1.8V
32 VDDIO PWR Power supply for differential outputs
33 DIF4 OUT Differential true clock output
34 DIF4# OUT Differential Complementary clock output
35 vOE4# IN
Active low input for enabling DIF pair 4. This pin has an internal pull-down.
1 =disable outputs, 0 = enable outputs
36 DIF5 OUT Differential true clock output
37 DIF5# OUT Differential Complementary clock output
38 vOE5# IN
Active low input for enabling DIF pair 5. This pin has an internal pull-down.
1 =disable outputs, 0 = enable outputs
39 VDDIO PWR Power supply for differential outputs
40 ^CKPWRGD_PD# IN
Input notifies device to sample latched inputs and start up on first high assertion. Low enters
Power Down Mode, subsequent high assertions exit Power Down Mode. This pin has internal
pull-up resistor.
41 ePAD GND Connect paddle to ground.
