©2013 Silicon Storage Technology, Inc. DS70005016C 08/13
16
4.9-5.9 GHz High-Linearity Power Amplifier
SST11CP15
Data Sheet
Product Ordering Information
Valid combinations for SST11CP15
SST11CP15-QUBE
SST11CP15 Evaluation Kits
SST11CP15-QUBE-K
Note:Valid combinations are those products in mass production or will be in mass production. Consult your SST
sales representative to confirm availability of valid combinations and to determine availability of new combi-
nations.
SST 11 CP 15 - QUBE
XX XX XX
-
XXXX
Environmental Attribute
E
1
= non-Pb contact (lead) finish
Package Modifier
B = 12 contact
Package Type
QU = UQFN
Product Family Identifier
Product Type
P = Power Amplifier
Voltage
C = 3.0-5.0V
Frequency of Operation
1 = 4.9-5.9 GHz
Product Line
1 = SST Communications
1. Environmental suffix “E” denotes non-Pb sol-
der. SST non-Pb solder devices are “RoHS
Compliant”.
©2013 Silicon Storage Technology, Inc. DS70005016C 08/13
17
4.9-5.9 GHz High-Linearity Power Amplifier
SST11CP15
Data Sheet
Packaging Diagrams
Figure 15:12-contact Ultra-thin Quad Flat No-lead (UQFN)
SST Package Code: QUB
12-uqfn-2x2-QUB-2.0
0.4 BSC
See notes
2 and 3
Pin #1
0.25
0.15
0.92
0.34
0.24
TOP VIEW
BOTTOM VIEW
SIDE VIEW
1mm
0.265
0.165
Pin #1
(laser
engraved
see note 2)
2.00
±0.05
2.00
±0.05
0.075
Note: 1. Similar to JEDEC JEP95 UQFN/USON variants, though number of contacts and some dimensions are different.
2. The topside pin #1 indicator is laser engraved; its approximate shape and location is as shown.
3. From the bottom view, the pin #1 indicator may be either a curved indent or a 45-degree chamfer.
4. The external paddle is electrically connected to the die back-side and to V
SS
.
This paddle must be soldered to the PC board; it is required to connect this paddle to the V
SS
of the unit.
Connection of this paddle to any other voltage potential will result in shorts and electrical malfunction of
the device.
5. Untoleranced dimensions are nominal target dimensions.
6. All linear dimensions are in millimeters (max/min).
0.60
0.50
0.05 Max
©2013 Silicon Storage Technology, Inc. DS70005016C 08/13
18
4.9-5.9 GHz High-Linearity Power Amplifier
SST11CP15
Data Sheet
Table 5: Revision History
Revision Description Date
00
Initial Release of Data Sheet
Jul 2010
01
Updated Features on page 1; Table 3 on page 6; and Figures 4, 5, 7,
8, and 14
Jan 2011
A
Updated Features on page 1, Table 3 on page 6, and Table 4 on
page 7
Added Figures -11 and 14
Applied new document format
Released document under letter revision system
Updated spec number from Sy1428 to DS76016
Aug 2011
B
Updated Figure 15 to reflect new Pin 1 indicator
Jul 2012
C
Fixed figure references in history table and “Electrical Specifications”
on page 6 to point to the correct figures
Aug 2013
©
2013 Silicon Storage Technology, Inc–a Microchip Technology Company. All rights reserved.
SST, Silicon Storage Technology, the SST logo, SuperFlash, MTP, and FlashFlex are registered trademarks of Silicon Storage Tech-
nology, Inc. MPF, SQI, Serial Quad I/O, and Z-Scale are trademarks of Silicon Storage Technology, Inc. All other trademarks and
registered trademarks mentioned herein are the property of their respective owners.
Specifications are subject to change without notice. Refer to www.microchip.com for the most recent documentation. For the most current
package drawings, please see the Packaging Specification located at http://www.microchip.com/packaging.
Memory sizes denote raw storage capacity; actual usable capacity may be less.
SST makes no warranty for the use of its products other than those expressly contained in the Standard Terms and Conditions of
Sale.
For sales office locations and information, please see www.microchip.com.
Silicon Storage Technology, Inc.
A Microchip Technology Company
www.microchip.com
ISBN:978-1-62077-406-9

SST11CP15-QUBE

Mfr. #:
Manufacturer:
Microchip Technology
Description:
RF Amplifier WLAN 11a/n PA Low Current
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet