4 ADC with PLL,
192 kHz, 24-Bit ADC
Data Sheet
AD1974
Rev. D Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©20072013 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Phase-locked loop generated or direct master clock
Low EMI design
107 dB dynamic range and SNR
−94 dB THD + N
Single 3.3 V supply
Tolerance for 5 V logic inputs
Supports 24 bits and 8 kHz to 192 kHz sample rates
Differential ADC input
SPI®-controllable for flexibility
Software-controllable clickless mute
Software power-down
Right justified, left justified, I
2
S, and TDM modes
Master and slave modes up to 16-channel input/output
Available in a 48-lead LQFP
Qualified for automotive applications
APPLICATIONS
Automotive audio systems
Home Theater Systems
Set-top boxes
Digital audio effects processors
GENERAL DESCRIPTION
The AD1974 is a high performance, single-chip ADC that pro-
vides four analog-to-digital converters (ADCs) with differential
inputs using the Analog Devices, Inc. patented multibit sigma-
delta (Σ-Δ) architecture. An SPI port is included, allowing a
microcontroller to enable mutes and adjust many other
parameters. The AD1974 operates from 3.3 V digital and analog
supplies. The AD1974 is available in a single-ended output
48-lead L Q F P.
The AD1974 is designed for low EMI. This consideration is
apparent in both the system and circuit design architectures.
By using the on-board phase-locked loop (PLL) to derive the
master clock from the LR clock or from an external crystal,
the AD1974 eliminates the need for a separate high frequency
master clock and can also be used with a suppressed bit clock.
The ADCs are designed using the latest continuous time archi-
tectures from Analog Devices to further minimize EMI. By
using 3.3 V supplies, power consumption is minimized, further
reducing emissions.
FUNCTIONAL BLOCK DIAGRAM
QUAD
DEC
FILTER
48kHz/
96kHz/192kHz
SERIAL DATA PORT
DIGITAL AUDIO
INPUT/OUTPUT
PRECISION
VOLTAGE
REFERENCE
12.48MHz
TIMING MANAGEMENT
AND CONTROL
(CLOCK AND PLL)
CONTROL PORT
SPI
CONTROL DATA
INPUT/OUTPUT
AD1974
ADC
ADC
ADC
ADC
ANALOG
AUDIO
INPUTS
SDATA
OUT
CLOCKS
06614-001
Figure 1.
AD1974* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
AD1974 Evaluation Board
ADUSB2EBZ Evaluation Board
DOCUMENTATION
Application Notes
AN-1006: Using the EVAL-ADUSB2EBZ
AN-1365: AD1933/AD1934/AD1938/AD1939/AD1974
Boot Up Application
Data Sheet
AD1974: 4 ADC with PLL, 192 kHz, 24-Bit ADC Data Sheet
User Guides
UG-046: Evaluating the AD1974 Four ADC with PLL 192
kHz, 24-Bit Codec
SOFTWARE AND SYSTEMS REQUIREMENTS
Automated Register Window Builder
TOOLS AND SIMULATIONS
AD1938 IBIS Model
REFERENCE MATERIALS
Technical Articles
Benchmarking Integrated Audio: Why CPU Usage Alone
No Longer Predicts User Experience
DESIGN RESOURCES
AD1974 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all AD1974 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
AD1974 Data Sheet
Rev. D | Page 2 of 24
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Test Conditions ............................................................................. 3
Analog Performance Specifications ........................................... 3
Crystal Oscillator Specifications................................................. 4
Digital Input/Output Specifications........................................... 4
Power Supply Specifications........................................................ 5
Digital Filters ................................................................................. 5
Timing Specifications .................................................................. 5
Absolute Maximum Ratings ............................................................ 7
Thermal Resistance ...................................................................... 7
ESD Caution .................................................................................. 7
Pin Configuration and Function Descriptions ............................. 8
Typical Performance Characteristics ........................................... 10
Theory of Operation ...................................................................... 11
Analog-to-Digital Converters (ADCs) .................................... 11
Clock Signals ............................................................................... 11
Reset and Power-Down ............................................................. 11
Serial Control Port ..................................................................... 12
Power Supply and Voltage Reference ....................................... 12
Serial Data PortsData Format ............................................... 12
TDM Modes ................................................................................ 13
Daisy-Chain Mode ..................................................................... 14
Control Registers ............................................................................ 18
PLL and Clock Control Registers ............................................. 18
AUXPORT Control Registers ................................................... 19
ADC Control Registers .............................................................. 20
Additional Modes ....................................................................... 21
Application Circuits ....................................................................... 23
Outline Dimensions ....................................................................... 24
Ordering Guide .......................................................................... 24
Automotive Products ................................................................. 24
REVISION HISTORY
3/13Rev. C to Rev. B
Change to t
CLH
Parameter, Table 7 ................................................... 6
Changes to Serial Control Port Section ........................................ 12
2/11Rev. B to Rev. C
Changes to Features Section............................................................ 1
Changes to Ordering Guide .......................................................... 24
Added Automotive Products Section .......................................... 24
6/10Rev. A to Rev. B
Changed 130°C to 125°C Throughout ........................................... 4
Changed T
A
to T
C
Throughout ....................................................... 4
Changes to Endnote 2 in Ordering Guide .................................. 24
11/09Rev. 0 to Rev. A
Changed Codec to ADC ............................................... Throughout
Changes to Features and General Description Sections .............. 1
Changes to Clock Signals Section ................................................ 11
Changes to Figure 12 and Figure 13 ............................................ 16
Changes to Control Registers Section ......................................... 18
4/07Revision 0: Initial Version

AD1974WBSTZ-RL

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Audio A/D Converter ICs 4 Channel ADC with On-Chip PLL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet