6. Electrical Characteristics
S1V30120 Hardware Specification (Rev. 1.2) EPSON 15
6.5 Full-Digital Audio Amplifier
The electrical characteristics of the full-digital audio amplifier are as follows unless otherwise noted:
− Ta = 25°C
− HVDD = 3.3V, LVDD = 1.8V, PLLVDD = 1.8V
− Input signal frequency = 1kHz
− Input signal level = 0dBFS
− fs = 32kHz
− Test frequency range= 20Hz ~16kHz
− Load impedance = 16Ω
− Connection to the 2
nd
low-pass filter to the output (HPO)
When AVDD = 1.8V
Parameter Symbol Condition Min. Typ. Max. Unit
Load impedance R
L
16 - -
Output power P
o
2 3 - mW
Total harmonic
distortion
THD+N Input signal level
= -6dBFS
- 0.13 0.25 %
Signal noise ratio SNR 73 76 - dB
When AVDD = 3.3V
Parameter Symbol Condition Min. Typ. Max. Unit
Load impedance R
L
16 - -
Output power P
o
8 11 - mW
Total harmonic
distortion
THD+N Input signal level
= -6dBFS
- 0.1 0.15 %
Signal noise ratio SNR 79 82 - dB
− Full Digital Amplifier characteristic may be deteriorated by AVDD Voltage fluctuation. Use
stable power supplies for AVDD.