Document Number: 001-98440 Rev. *F Page 23 of 30
Power Down
Analog to Digital Converter
Table 25. PD DC Specifications
Spec ID Parameter Description Min Typ Max Units Details/Conditions
SID.PD.1 Rp_std
DFP CC termination for default USB
Power
64 80 96 µA –
SID.PD.2 Rp_1.5A DFP CC termination for 1.5A power 166 180 194 µA –
SID.PD.3 Rp_3.0A DFP CC termination for 3.0A power 304 330 356 µA –
SID.PD.4 Rd UFP CC termination 4.59 5.1 5.61 k –
SID.PD.5 Rd_DB
UFP Dead Battery CC termination on
CC1 and CC2
4.08 5.1 6.12 k
All supplies forced to 0 V and 1.0 V
applied at CC1 or CC2. Applicable
for DRP applications only.
SID.PD.15 Vdrop_V5V_CC1
Voltage drop from V5V_P1 and
V5V_P2 pins to CC1 pin while
sourcing 215 mA.
CC1 and CC2 pins of Port1 and Port2
are not short circuit protected.
Max allowed sourcing current is
500 mA.
––100mV –
SID.PD.16 Vdrop_V5V_CC2
Voltage drop from V5V_P1 and
V5V_P2 pins to CC2 pin while
sourcing 215 mA
CC1 and CC2 pins of Port1 and Port2
are not short circuit protected.
Max allowed sourcing current is
500 mA.
––100mV –
Table 26. ADC DC Specifications
Spec ID Parameter Description Min Typ Max Units Details/Conditions
SID.ADC.1 Resolution ADC resolution – 8 – bits –
SID.ADC.2 INL Integral nonlinearity –1.5 – 1.5 LSB –
SID.ADC.3 DNL Differential nonlinearity –2.5 – 2.5 LSB –
SID.ADC.4 Gain Error Gain error –1.0 – 1.0 LSB –
Table 27. ADC AC Specifications
Spec ID Parameter Description Min Typ Max Units Details/Conditions
SID.ADC.5 SLEW_Max
Rate of change of sampled voltage
signal
–– 3V/ms –