EZ-PD™ CCG4
Document Number: 001-98440 Rev. *F Page 28 of 30
References and Links To Applications Collaterals
Knowledge Base Articles
Key Differences Among EZ-PD™ CCG1, CCG2, CCG3 and
CCG4 - KBA210740
Programming EZ-PD™ CCG2, EZ-PD™ CCG3 and EZ-PD™
CCG4 Using PSoC® Programmer and MiniProg3 - KBA96477
CCGX Frequently Asked Questions (FAQs) - KBA97244
Handling Precautions for CY4501 CCG1 DVK - KBA210560
Cypress EZ-PD™ CCGx Hardware - KBA204102
Difference between USB Type-C and USB-PD - KBA204033
CCGx Programming Methods - KBA97271
Getting started with Cypress USB Type-C Products -
KBA04071
Type-C to DisplayPort Cable Electrical Requirements
Dead Battery Charging Implementation in USB Type-C
Solutions - KBA97273
Termination Resistors Required for the USB Type-C Connector
– KBA97180
VBUS Bypass Capacitor Recommendation for Type-C Cable
and Type-C to Legacy Cable/Adapter Assemblies – KBA97270
Need for Regulator and Auxiliary Switch in Type-C to
DisplayPort (DP) Cable Solution - KBA97274
Need for a USB Billboard Device in Type-C Solutions –
KBA97146
CCG1 Devices in Type-C to Legacy Cable/Adapter Assemblies
– KBA97145
Cypress USB Type-C Controller Supported Solutions –
KBA97179
Termination Resistors for Type-C to Legacy Ports – KBA97272
Handling Instructions for CY4502 CCG2 Development Kit –
KBA97916
Thunderbolt™ Cable Application Using CCG3 Devices -
KBA210976
Power Adapter Application Using CCG3 Devices - KBA210975
Methods to Upgrade Firmware on CCG3 Devices - KBA210974
Device Flash Memory Size and Advantages - KBA210973
Applications of EZ-PD™ CCG4 - KBA210739
Application Notes
AN96527 - Designing USB Type-C Products Using Cypress’s
CCG1 Controllers
AN95615 - Designing USB 3.1 Type-C Cables Using EZ-PD™
CCG2
AN95599 - Hardware Design Guidelines for EZ-PD™ CCG2
AN210403 - Hardware Design Guidelines for Dual Role Port
Applications Using EZ-PD™ USB Type-C Controllers
AN210771 - Getting Started with EZ-PD™ CCG4
Reference Designs
EZ-PD™ CCG2 Electronically Marked Cable Assembly
(EMCA) Paddle Card Reference Design
EZ-PD™ CCG2 USB Type-C to DisplayPort Cable Solution
CCG1 USB Type-C to DisplayPort Cable Solution
CCG1 USB Type-C to HDMI/DVI/VGA Adapter Solution
EZ-PD™ CCG2 USB Type-C to HDMI Adapter Solution
CCG1 Electronically Marked Cable Assembly (EMCA) Paddle
Card Reference Design
CCG1 USB Type-C to Legacy USB Device Cable Paddle Card
Reference Schematics
EZ-USB GX3 USB Type-C to Gigabit Ethernet Dongle
EZ-PD™ CCG2 USB Type-C Monitor/Dock Solution
CCG2 20W Power Adapter Reference Design
CCG2 18W Power Adapter Reference Design
EZ-USB GX3 USB Type-A to Gigabit Ethernet Reference
Design Kit
Kits
CY4501 CCG1 Development Kit
CY4502 EZ-PD™ CCG2 Development Kit
CY4531 EZ-PD CCG3 Evaluation Kit
CY4541 EZ-PD™ CCG4 Evaluation Kit
Datasheets
CCG1 Datasheet: USB Type-C Port Controller with Power
Delivery
CYPD1120 Datasheet: USB Power Delivery Alternate Mode
Controller on Type-C
CCG2: USB Type-C Port Controller Datasheet
CCG3: USB Type-C Controller Datasheet
EZ-PD™ CCG4
Document Number: 001-98440 Rev. *F Page 29 of 30
Document History Page
Document Title: EZ-PD™ CCG4 USB Type-C Port Controller
Document Number: 001-98440
Revision ECN
Orig. of
Change
Submission
Date
Description of Change
** 4921014 MURT 09/24/2015 New datasheet
*A 4999504 MURT 11/03/2015
Updated Ta b le 1, Table 2, Table 7, Table 8, Tab le 18 and Table 23.
Updated Figure 3 through Figure 6 and Figure 7.
*B 5049109 MURT 12/14/2015 Updated Ta bl e 8 and Table 26 .
*C 5141544 MVTA 03/02/2016
Removed “Fixed UART DC Specifications”, “Fixed I2C DC Specifications”, “Fixed SPI DC
Specifications”, “IMO DC SPecifications” and “ILO DC Specifications” table.
Updated application schematic for both single port and dual port notebook applications
Updated copyright information
Updated Sleep Current in General Description from 2 mA to 2.5 mA
Updated description for pin#34, pin#5, and pin#10 row in Table 1
Updated description for pin#5 and pin#10 row in Table 2
*D 5290129 MURT/MVTA 05/31/2016 Updated to include support for PD 3.0 features.
*E 5307418 VGT 06/14/2016
Added Available Firmware and Software Tools.
Added descriptive notes for the application diagrams.
Added References and Links To Applications Collaterals.
Updated Cypress logo and copyright information.
*F 5669709 SVPH 03/30/2017
Updated SID34 typ value.
Updated the template.
Removed CYPD4135 and CYPD4235 parts.
Moved datasheet status to Final.
Document Number: 001-98440 Rev. *F Revised March 30, 2017 Page 30 of 30
EZ-PD™ CCG4
© Cypress Semiconductor Corporation 2015-2017. This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC ("Cypress"). This document,
including any software or firmware included or referenced in this document ("Software"), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries
worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other
intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress
hereby grants you under its copyright rights in the Software, a personal, non-exclusive, nontransferable license (without the right to sublicense) (a) for Software provided in source code form, to modify
and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either
directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units. Cypress also grants you a personal, non-exclusive, nontransferable, license (without the right
to sublicense) under those claims of Cypress's patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely to the minimum
extent that is necessary for you to exercise your rights under the copyright license granted in the previous sentence. Any other use, reproduction, modification, translation, or compilation of the Software
is prohibited.
CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes to this document without further notice. Cypress does not
assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or
programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application
made of this information and any resulting product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of
weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or
hazardous substances management, or other uses where the failure of the device or system could cause personal injury, death, or property damage ("Unintended Uses"). A critical component is any
component of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole
or in part, and Company shall and hereby does release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. Company shall indemnify
and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress
products.
Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F-RAM, and Traveo are trademarks or registered trademarks of Cypress in
the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners.
Sales, Solutions, and Legal Information
Worldwide Sales and Design Support
Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office
closest to you, visit us at Cypress Locations.
Products
ARM
®
Cortex
®
Microcontrollers cypress.com/arm
Automotive cypress.com/automotive
Clocks & Buffers cypress.com/clocks
Interface cypress.com/interface
Internet of Things cypress.com/iot
Memory cypress.com/memory
Microcontrollers cypress.com/mcu
PSoC cypress.com/psoc
Power Management ICs cypress.com/pmic
Touch Sensing cypress.com/touch
USB Controllers cypress.com/usb
Wireless Connectivity cypress.com/wireless
PSoC
®
Solutions
PSoC 1 | PSoC 3 | PSoC 4 | PSoC 5LP
Cypress Developer Community
Forums | WICED IOT Forums | Projects | Video | Blogs |
Training | Components
Technical Support
cypress.com/support

CYPD4226-40LQXIT

Mfr. #:
Manufacturer:
Cypress Semiconductor
Description:
USB Interface IC CCG4
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union