1. General description
The 74LVT374 is a high-performance product designed for V
CC
operation at 3.3 V.
This device is an 8-bit, edge triggered register coupled to eight 3-state output buffers. The
two sections of the device are controlled independently by the clock (pin CP) and output
enable (pin OE
) control gates. The state of each Dn input (one setup time before the
LOW-to-HIGH clock transition) is transferred to the corresponding flip-flops Qn output.
The 3-state output buffers are designed to drive heavily loaded 3-state buses, MOS
memories, or MOS microprocessors.
The active LOW output enable (pin OE
) controls all eight 3-state buffers independent of
the clock operation.
When pin OE
is LOW, the stored data appears at the outputs. When pin OE is HIGH, the
outputs are in the high-impedance OFF-state, which means they will neither drive nor load
the bus.
2. Features and benefits
Inputs and outputs arranged for easy interfacing to microprocessors
3-state outputs for bus interfacing
Common output enable control
TTL input and output switching levels
Input and output interface capability to systems at 5 V supply
Bus hold data inputs eliminate need for external pull-up resistors to hold unused inputs
Live insertion and extraction permitted
No bus current loading when output is tied to 5 V bus
Power-up reset
Power-up 3-state
Latch-up protection
JESD78 class II exceeds 500 mA
ESD protection:
HBM JESD22-A114E exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
Specified from 40 C to +85 C
74LVT374
3.3 V octal D-type flip-flop; 3-state
Rev. 4 — 22 November 2011 Product data sheet