,6/9,6/9,6/9
Integrated Silicon Solution, Inc. — www.issi.com 12
Rev. B
07/29/2015
'&$1'$&23(5$7,1*5$1*(
$%62/87(0$;,0805$7,1*6
Notes:
1. Stresses under those listed in “Absolute Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only. The functional operation of the device or
DQ\RWKHUFRQGLWLRQVXQGHUWKRVHLQGLFDWHGLQWKHRSHUDWLRQDOVHFWLRQVRIWKLVVSHFL¿FDWLRQ
is not implied. Exposure to absolute maximum rating condition for extended periods may
affected device reliability.
2. Maximum DC voltage on input or I/O pins are V
CC
+ 0.5V. During voltage transitioning
period, input or I/O pins may overshoot to V
CC
+ 2.0V for a period of time up to 20 ns.
Minimum DC voltage on input or I/O pins are -0.5V. During voltage transitioning period,
input or I/O pins may undershoot GND to -2.0V for a period of time up to 20 ns.
3. Maximum DC voltage on A9 pin is +13.0 V. During voltage transitioning period, A9 pin
may overshoot to +14.0 V for a period of time up to 20 ns. Minimum DC voltage on A9 pin
is -0.5V. During voltage transitioning period, A9 pin may undershoot GND to -2.0V for a
period of time up to 20 ns.
Temperature Under Bias -65°C to +125°C
Storage Temperature
-65°C to +125°C
Surface Mount Lead Soldering Temperature 240°C 3 Seconds
Input Voltage with Respect to Ground on All
Pins except A9 pin (2)
-0.5V to VCC + 0.5 V
Input Voltage with Respect to Ground on A9
pin (3)
-0.5V to +13.0 V
All Output Voltage with Respect to Ground -0.5V to VCC + 0.5 V
VCC (2) -0.5V to +6.0 V
3DUW1XPEHU ,6/9
Operating Temperature 0° to +85°C
Vcc Power Supply 2.70 V - 3.60 V