IDT1339
REAL-TIME CLOCK WITH SERIAL I
2
C INTERFACE RTC
IDT®
REAL-TIME CLOCK WITH SERIAL I
2
C INTERFACE 14
IDT1339 REV S 031014
Handling, PCB Layout, and Assembly
The IDT1339 package contains a quartz tuning-fork crystal. Pick-and-place equipment may be used, but precautions should
be taken to ensure that excessive shocks are avioded. Ultarsonic cleaning equipment should be avioded to prevent damage
to the crystal.
Avoid running signal traces under the package, unless a ground plane is placed between the package and the signal line.
All NC (no connect) pins must be connected to ground.
Moisture-sensitive packages are shipped from the factory dry-packed. Handling instructions listed on the package label must
be followed to prevent damage during reflow. Refer to the IPC/JEDEC J-STD-020 standard for moisture-sensitive device
(MSD) classifications.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the IDT1339. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Recommended DC Operating Conditions
Note A: Operating voltages without a back up supply connected.
Note B: When a back up supply voltage is connected choose proper part number 1339-2 or 1339-31 depending
upon the back up supply voltage.
Item Symbol Rating
All Inputs and Outputs -0.3 V to +6.0 V
Storage Temperature -55 to +125C
Soldering Temperature 260C
Parameter Symbol Min. Typ. Max. Units
Ambient Operating Temperature T
A
-40 +85 C
Backup Supply Voltage V
BACKUP
1.3 3.0 3.7 V
Pull-up Resistor Voltage (SQW/INT
, SDA, SCL),
V
CC
= 0V
V
PU
5.5 V
Logic 1 V
IH
0.8V
CC
V
CC
+ 0.3 V
Logic 0 V
IL
-0.3 0.2V
CC
V
Supply Voltage
IDT1339-2, Note A
V
CC
V
PF
2.0 5.5
V
IDT1339-31, Note A V
PF
3.3 5.5
Power Fail Voltage
IDT1339-2, Note B
V
PF
1.40 1.70 1.80
V
IDT1339-31, Note B 2.45 2.70 2.97
