FEDL610Q435-䋰2
LAPIS Semiconductor
ML610Q435/ML610Q436
3/35
x LCD driver
Dot matrix can be supported.
ML610Q435: 1024 dots max. (64 seg u 16 com)
ML610Q436: 1536 dots max. (64 seg u 24 com)
1/1 to 1/24 duty
1/3 or 1/4 bias (built-in bias generation circuit)
Frame frequency selecable (approx. 64 Hz, 73 Hz, 85 Hz, and 102 Hz)
Bias voltage multiplying clock selectable (8 types)
Contrast adjustment (1/3 bias: 32 steps, 1/4 bias: 20 steps)
LCD drive stop mode, LCD display mode, all LCDs on mode, and all LCDs off mode selectable
Programmable display allocation function (available only when 1/1~1/8 duty is selected)
x Reset
Reset through the RESET_N pin
Power-on reset generation when powered on
Reset when oscillation stop of the low-speed clock is detected
(“A”version(ML610Q435A/Q436A) don’t have the oscilation stop function.)
Reset by the watchdog timer (WDT) overflow
x Power supply voltage detect function
Judgment voltages: One of 16 levels
Judgment accuracy: r2% (Typ.)
x Clock
Low-speed clock: (This LSI can not guarantee the operation withoug low-speed clock)
Crystal oscillation (32.768 kHz)
High-speed clock:
Built-in RC oscillation (500 kHz)
Built-in PLL oscillation (8.192 MHz rTBD%), crystal/ceramic oscillation (4.096 MHz), external clock
Selection of high-speed clock mode by software:
Built-in RC oscillation, built-in PLL oscillation, crystal/ceramic oscillation, external clock
x Power management
HALT mode: Instruction execution by CPU is suspended (peripheral circuits are in operating states).
STOP mode: Stop of low-speed oscillation and high-speed oscillation (Operations of CPU and peripheral circuits are
stopped.)
Clock gear: The frequency of high-speed system clock can be changed by software (1/1, 1/2, 1/4, or 1/8 of the oscillation
clock)
Block Control Function: Power down (reset registers and stop clock supply) the circuits of unused peripherals.
x Shipment
Chip
ML610Q435-xxxWA (Blank product: ML610Q435-NNNWA)
ML610Q436-xxxWA (Blank product: ML610Q436-NNNWA)
ML610Q435A-xxxWA (Blank product: ML610Q435A-NNNWA)
ML610Q436A-xxxWA (Blank product: ML610Q436A-NNNWA)
144-pin plastic LQFP
ML610Q435-xxxTCZ03A (Blank product: ML610Q435-NNNTCZ03A)
ML610Q436-xxxTCZ03A (Blank product: ML610Q436-NNNTCZ03A)
ML610Q435A-xxxTCZ03A (Blank product: ML610Q435A-NNNTCZ03A)
ML610Q436A-xxxTCZ03A (Blank product: ML610Q436A-NNNTCZ03A)
xxx: ROM code number
x Guaranteed operating range
Operating temperature: 20
qC to 70qC
Operating voltage: V
DD
= 1.1V to 3.6V, AV
DD
= 2.2V to 3.6V