LTC6403-1
1
64031fa
TYPICAL APPLICATION
FEATURES
APPLICATIONS
DESCRIPTION
200MHz, Low Noise,
Low Power Fully Differential
Input/Output Amplifi er/Driver
The LTC
®
6403-1 is a precision, very low noise, low dis-
tortion, fully differential input/output amplifi er optimized
for 3V to 5V, single supply operation. The LTC6403-1 is
unity gain stable. The LTC6403-1 closed-loop bandwidth
extends from DC to 200MHz. In addition to the normal
unfi ltered outputs (+OUT and –OUT), the LTC6403-1 has a
built-in 44.2MHz differential single-pole lowpass fi lter and
an additional pair of fi ltered outputs (+OUTF, and –OUTF).
An input referred voltage noise of 2.8nV/√Hz enables the
LTC6403-1 to drive state-of-the-art 14- to 18-bit ADCs
while operating on the same supply voltage, saving system
cost and power. The LTC6403-1 maintains its performance
for supplies as low as 2.7V. It draws only 10.8mA, and
has a hardware shutdown feature which reduces current
consumption to 170μA.
The LTC6403-1 is available in a compact 3mm × 3mm
16-pin leadless QFN package and operates over a –40°C
to 85°C temperature range.
Single-Ended Input to Differential Output
With Common Mode Level Shifting
n
Very Low Distortion: (2V
P-P
, 3MHz): –95dBc
n
Fully Differential Input and Output
n
Low Noise: 2.8nV/√Hz Input-Referred
n
200MHz Gain-Bandwidth Product
n
Built-In Clamp: Fast Overdrive Recovery
n
Slew Rate: 200V/μs
n
Adjustable Output Common Mode Voltage
n
Rail-to-Rail Output Swing
n
Input Range Extends to Ground
n
Large Output Current: 60mA (Typ)
n
DC Voltage Offset <1.5mV (Max)
n
10.8mA Supply Current
n
2.7V to 5.25V Supply Voltage Range
n
Low Power Shutdown
n
Tiny 3mm × 3mm × 0.75mm 16-Pin QFN Package
n
Differential Input A/D Converter Driver
n
Single-Ended to Differential Conversion/Amplifi cation
n
Common Mode Level Translation
n
Low Voltage, Low Noise, Signal Processing
, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
–
+
402Ω
3V
V
OCM
1.5V
0V
64031 TA01
V
S
1V
P-P
402Ω
0.1μF
392Ω
LTC6403-1
0.01μF
50Ω
SIGNAL
GENERATOR
54.9Ω
422Ω
1.5V
1V
P-P
2V
P-P
FREQUENCY (MHz)
1
–120
DISTORTION (dBc)
–110
–90
–70
–50
10 100
64031 TA01b
–30
–100
–80
–60
–40
SINGLE-ENDED INPUT
V
S
= 3V
V
OCM
= V
ICM
= 1.5V
R
F
= R
I
= 402Ω
R
LOAD
= 800Ω
V
OUTDIFF
= 2V
P-P
SECOND
THIRD
Harmonic Distortion vs Frequency