LT1116
10
1116fc
For more information www.linear.com/LT1116
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
LINEAR TECHNOLOGY CORPORATION 2006
LT 0216 REV C • PRINTED IN USA
N8 REV I 0711
.065
(1.651)
TYP
.045 – .065
(1.143 – 1.651)
.130 ±.005
(3.302 ±0.127)
.020
(0.508)
MIN
.018 ±.003
(0.457 ±0.076)
.120
(3.048)
MIN
.008 – .015
(0.203 – 0.381)
.300 – .325
(7.620 – 8.255)
.325
+.035
–.015
+0.889
–0.381
8.255
( )
1 2
3
4
8 7 6
5
.255 ±.015*
(6.477 ±0.381)
.400*
(10.160)
MAX
INCHES
MILLIMETERS
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .010 INCH (0.254mm)
.100
(2.54)
BSC
8-Lead PDIP (Narrow .300 Inch)
(Reference LTC DWG # 05-08-1510 Rev I)
(408) 432-1900
●
FAX: (408) 434-0507
●
www.linear.com/LT1116
relaTeD parTs
package DescripTion
PART NUMBER DESCRIPTION COMMENTS
LT1016 10ns Precision Comparator Complementary Outputs with Latch, LT1116 Pinout
LT1394 7ns Single Supply Comparator 6mA, 100MHz Toggle Rate, LT1116 Pinout
LT1713/LT1714 7ns Single/Dual Comparator Rail-to-Rail Input and Output, 2.7V to + 5.5V Operation
LT1715 4ns Dual Comparator Independent Input/Output Supplies, 150MHz Toggle Rate
LT1719 4.5ns Single Supply Comparator Independent Input/Output Supplies, 3V/5V
LT1720/LT1721 4.5ns Dual/Quad Comparator 4mA per Comparator, Input 100mV Below V –, 3V/5V
LTC6752 2.9ns 280MHz CMOS Output Comparator Family 5 Options Offer a Broad Range of Features
.016 – .050
(0.406 – 1.270)
.010 – .020
(0.254 – 0.508)
× 45°
0°– 8° TYP
.008 – .010
SO8 REV G 0212
.053 – .069
(1.346 – 1.752)
.014 – .019
(0.355 – 0.483)
TYP
.004 – .010
(0.101 – 0.254)
.050
(1.270)
BSC
1
2
3
4
.150 – .157
NOTE 3
8
7
6
5
.189 – .197
(4.801 – 5.004)
NOTE 3
.228 – .244
(5.791 – 6.197)
.245
MIN
.160 ±.005
RECOMMENDED SOLDER PAD LAYOUT
.045 ±.005
.050 BSC
.030 ±.005
TYP
INCHES
(MILLIMETERS)
NOTE:
1. DIMENSIONS IN
2. DRAWING NOT TO SCALE
3. THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .006" (0.15mm)
4. PIN 1 CAN BE BEVEL EDGE OR A DIMPLE
S8 Package
8-Lead Plastic Small Outline (Narrow .150 Inch)
(Reference LTC DWG # 05-08-1610 Rev G)
Please refer to http://www.linear.com/product/LT1116#packaging for the most recent package drawings.
