Products and specifications discussed herein are subject to change by Micron without notice.
1GB, 2GB (x64, SR) 240-Pin DDR3 SDRAM UDIMM
Features
PDF: 09005aef82b21119/Source: 09005aef82b2112c Micron Technology, Inc., reserves the right to change products or specifications without notice.
JTF8c128_256x64AY.fm - Rev. B 6/08 EN
1 ©2007 Micron Technology, Inc. All rights reserved.
DDR3 SDRAM UDIMM
MT8JTF12864A – 1GB
MT8JTF25664A – 2GB
For component data sheets, refer to Micron’s Web site: www.micron.com
Features
• DDR3 functionality and operations supported as
defined in the component data sheet
• 240-pin, unbuffered dual in-line memory module
(UDIMM)
• Fast data transfer rates: PC3-10600, PC3-8500,
or PC3-6400
• 1GB (128 Meg x 64), 2GB (256 Meg x 64)
•V
DD = VDDQ = +1.5V ±0.075V
•V
DDSPD = +3.0V to +3.6V
• Reset pin for improved system stability
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Single rank
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Adjustable data-output drive strength
• Serial presence-detect (SPD) EEPROM
• Gold edge contacts
•Lead-free
• Fly-by topology
• Terminated control, command, and address bus
Figure 1: 240-Pin UDIMM (MO-269 R/C A)
Notes: 1. Contact Micron for industrial temperature
module offerings.
2. Not recommended for new designs.
Options Marking
• Operating temperature
1
– Commercial (0°C ≤ T
A
≤ +70°C) None
– Industrial (–40°C ≤ T
A
≤ +85°C) I
•Package
– 240-pin DIMM (lead-free) Y
• Frequency/CAS latency
– 1.5ns @ CL = 9 (DDR3-1333) -1G4
– 1.5ns @ CL = 10 (DDR3-1333)
2
-1G3
– 1.87ns @ CL = 7 (DDR3-1066) -1G1
– 1.87ns @ CL = 8 (DDR3-1066)
2
-1G0
– 2.5ns @ CL = 5 (DDR3-800)
2
-80C
– 2.5ns @ CL = 6 (DDR3-800)
2
-80B
PCB height: 30mm (1.18in)
Table 1: Key Timing Parameters
Speed
Grade
Industry
Nomenclature
Data Rate (MT/s)
t
RCD
(ns)
t
RP
(ns)
t
RC
(ns)CL = 10 CL = 9 CL = 8 CL = 7 CL = 6 CL = 5
-1G4 PC3-10600 1333 1333 1066 1066 800 – 13.5 13.5 49.5
-1G3 PC3-10600 1333 – 1066 – 800 – 15 15 51
-1G1 PC3-8500 – – 1066 1066 800 – 13.125 13.125 50.625
-1G0 PC3-8500 – – 1066 – 800 – 15 15 52.5
-80C PC3-6400 – – – – 800 800 12.5 12.5 50
-80B PC3-6400 – – – – 800 – 15 15 52.5