MAX1084/MAX1085
400ksps/300ksps, Single-Supply, Low-Power,
Serial 10-Bit ADCs with Internal Reference
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—MAX1084
(V
DD
= +4.5V to +5.5V, f
SCLK
= 6.4MHz, 50% duty cycle, 16 clocks/conversion cycle (400ksps), 4.7µF capacitor at REF, T
A
= T
MIN
to
T
MAX
, unless otherwise noted. Typical values are at T
A
= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
DD
to GND .............................................................-0.3V to +6V
AIN to GND................................................-0.3V to (V
DD
+ 0.3V)
REF to GND ...............................................-0.3V to (V
DD
+ 0.3V)
Digital Inputs to GND...............................................-0.3V to +6V
DOUT to GND............................................-0.3V to (V
DD
+ 0.3V)
DOUT Current..................................................................±25mA
Continuous Power Dissipation (T
A
= +70°C)
8-Pin SO (derate 5.88mW/°C above +70°C) ..............471mW
Operating Temperature Ranges
MAX1084_CSA/MAX1085_CSA.........................0°C to +70°C
MAX1084_ESA/MAX1085_ESA ......................-40°C to +85°C
Storage Temperature Range............................-60°C to +150°C
Lead Temperature (soldering, 10s)................................+300°C
Soldering Temperature (reflow)......................................+260°C
MAX1084A
SINAD > 58dB
-3dB point
Up to the 5th harmonic
f
IN1
= 99kHz, f
IN2
=102kHz
MAX1084B
No missing codes over temperature
CONDITIONS
%40 60Duty Cycle
MHz0.5 6.4f
SCLK
Serial Clock Frequency
ps< 50Aperture Jitter
ns10Aperture Delay
ns468t
ACQ
Track/Hold Acquisition Time
µs2.5t
CONV
Conversion Time (Note 4)
kHz350Full-Linear Bandwidth
MHz6Full-Power Bandwidth
dB76IMDIntermodulation Distortion
dB70SFDRSpurious-Free Dynamic Range
LSB
±0.5
INLRelative Accuracy (Note 2)
Bits10Resolution
dB-70THDTotal Harmonic Distortion
dB60SINAD
Signal-to-Noise Plus Distortion
Ratio
ppm/°C ±0.8
Gain-Error Temperature
Coefficient
±1.0
LSB±1.0DNLDifferential Nonlinearity
LSB±4.0Offset Error
LSB±3.0Gain Error (Note 3)
UNITSMIN TYP MAXSYMBOLPARAMETER
pF18Input Capacitance
V0 2.5V
AIN
Input Voltage Range
DC ACCURACY (Note 1)
DYNAMIC SPECIFICATIONS (100kHz sine wave, 2.5V
P-P
, clock = 6.4MHz)
CONVERSION RATE
ANALOG INPUT (AIN)