Philips Semiconductors Product data sheet
SCC2698B
Enhanced octal universal asynchronous
receiver/transmitter (Octal UART)
yyyy mmm dd
29
This document contains data from the preliminary specification.
Development
Preliminary [short] data sheet
Data sheet status
Document status
[1][2]
Objective [short] data sheet
Product status
[3]
Definition
This document contains data from the objective specification for product development.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this data sheet was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.semiconductors.philips.com.
Qualification
Product [short] data sheet Production This document contains the product specification.
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Philips Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences
of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full data sheet, which is available on request via the local Philips
Semiconductors sales office. In case of any inconsistency or conflict with the
short data sheet, the full data sheet shall prevail.
Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, Philips Semiconductors does not give any representations
or warranties, expressed or implied, as to the accuracy or completeness of
such information and shall have no liability for the consequences of use of
such information.
Right to make changes — Philips Semiconductors reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — Philips Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of a Philips Semiconductors product can reasonably be
expected to result in personal injury, death or severe property or
environmental damage. Philips Semiconductors accepts no liability for
inclusion and/or use of Philips Semiconductors products in such equipment
or applications and therefore such inclusion and/or use is at the customer’s
own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Philips Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause
permanent damage to the device. Limiting values are stress ratings only and
operation of the device at these or any other conditions above those given in
the Characteristics sections of this document is not implied. Exposure to
limiting values for extended periods may affect device reliability.
Terms and conditions of sale — Philips Semiconductors products are
sold subject to the general terms and conditions of commercial sale, as
published at http://www.semiconductors.philips.com/profile/terms,
including those pertaining to warranty, intellectual property rights
infringement and limitation of liability, unless explicitly otherwise agreed to in
writing by Philips Semiconductors. In case of any inconsistency or conflict
between information in this document and such terms and conditions, the
latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights,
patents or other industrial or intellectual property rights.
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Contact information
For additional information please visit: http://www.semiconductors.philips.com
For sales office addresses, send an e-mail to: sales.addresses@www.semiconductors.philips.com.
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
Koninklijke Philips Electronics N.V. 2006. All rights reserved.
For more information, please visit http://www.semiconductors.philips.com.
For sales office addresses, email to: sales.addresses@www.semiconductors.philips.com.
Date of release: 20060807
Document identifier: SCC2698B_4
Legal Information
