GU128X32D-7003
- 11 -
7 Function
7.1 Commands
The details of each command as follows;
Note: The size of character (X x Y dot) desclibed in this section is depending on the command of
“Character display width” or “Font magnified display”.
Number of X dot and Y dot for 1 character width for each commands except “Character display”
under the condition of each character display width are as follows;
Character type Fixed character
width 1
Fixed character
width 2
Proportional
character width 1
Proportional
character width 2
Nunber of X dot 5 + 1 5 + 2 5 + 1 5 + 2
Nunber of Y dot 7 + 1 7 + 1 7 + 1 7 + 1
7.1.1 Character display
Code: 20H – FFH
Name: Character display
Function: Display the character on cursor position.
This command effects on the current window selected by “Current window select”.
When MD1 mode is selected.
Cursor position
X direction Y direction
Operation
The space for 1 character size
is in right side.
- Display >> HT
The space for one line is in
the lower side.
HT >> Display >> HT
Right end
The space for one line is
NOT in the lower side.
HT >> Display >> HT
When MD2 mode is selected.
Cursor position
X direction Y direction
Operation
The space for 1 character size is in
right side.
- Display >> HT
The space for one line is in the
lower side.
HT >> Display >> HT
Right end
The space for one line is NOT
in the lower side.
HT >> Display >> HT
When MD3 mode is selected.
Cursor position
X direction Y direction
Operation
The space for 1 character size
is in right side.
- Display >> HT
Right end - HT >> Display >> HT